Table of Contents
Advertisement
Appendix
Indicator
Global error
indicator
CSS indicator
3
ID indicator
I
Note on the onboard LAN controller
The system board is equipped with a Gigabit Ethernet Controller that
supports transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s.
The separate management LAN connector is used as a management
interface (iRMC S4) and is prepared for operation with the Remote
Management. Optionally LAN connector 1 can also be used for iRMC S4
server management.
iRMC-related status signals
ID indicator
blue flashing
blue flashing
420
Status
Description
off
no critical event (non CSS component)
prefailure detected (non CSS
orange on
component)
orange
non CSS component failure
flashing
off
no critical event (CSS component)
yellow on
prefailure detected (CSS component)
yellow
CSS component failure
flashing
server has been highlighted using
ServerView Operations Manager, iRMC
blue on
web frontend or the ID button on the
front panel for easy identification
blue
local monitor is not active
flashing
Global error
indicator
off
orange flashing
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has
been disabled during the remote
session.
An emergency flash of the iRMC
firmware is in progress.
RX2520 M1
Advertisement
Table of Contents
