Removing A 2.5-Inch Dummy Module - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.2.2.2

Removing a 2.5-inch dummy module

Figure 35: Removing a 2.5-inch dummy module
Ê Press both tabs together (1) and pull the dummy module out of its bay (2).
V
CAUTION!
Save the dummy module for future use.
Always replace dummy modules into unused HDD / SSD bays to
comply with applicable EMC regulations and satisfy cooling
requirements.
128 Upgrade and Maintenance Manual
RX2520 M1