Concluding Steps; Software Configuration - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

14.3.3.4 Concluding steps

"Installing the air duct" on page 59
Ê
"Mounting the housing cover" on page 61
Ê
"Sliding the server into the rack" on page 64
Ê
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
"Connecting the server to the power source" on page 64
Ê
"Enabling SVOM boot watchdog functionality" on page 87
Ê
"Enabling BitLocker functionality" on page 93
Ê

14.3.3.5 Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Switch on the server.
Ê Right after switching on the server, insert the "Recovery Tool CD" into the
DVD drive and close the drive tray.
Ê The server should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
RX2520 M1
Upgrade and Maintenance Manual
System board and components
61.
345