Expansion cards and backup units
Ê Carefully unlatch and fold down the locking bail on the SFP+ transceiver
module to eject the transceiver from the socket connector.
Figure 115: Removing the SFP+ transceiver
Ê Pull the SFP+ transceiver module out of its socket connector.
Ê Reattach the protective optical port plug to the transceiver optical bores.
I
Place the removed SFP+ transceiver module in an antistatic bag or
other protective environment.
9.6.3
Replacing SFP+ transceiver modules
Upgrade and Repair Unit
(URU)
Tool:
tool-less
For Fiber Channel over Ethernet (FCoE) configurations, the ethernet server
adapter is equipped with one or two SFP+ (small form-factor pluggable)
transceiver modules.
218
Upgrade and Maintenance Manual
Hardware: 5 minutes
RX2520 M1