Table of Contents
Advertisement
8
System fan
Safety notes
V
CAUTION!
Do not damage or modify internal cables or devices. Doing so may
●
cause a device failure, fire, or electric shock.
Devices and components inside the server remain hot after
●
shutdown. After shutting down the server, wait for hot components to
cool down before installing or removing internal options.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs).
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
If devices are installed or disassembled using methods other than
●
those outlined in this chapter, the warranty will be invalidated.
For further information, please refer to chapter
●
information" on page 37
8.1
Basic information
The following fans are available:
– five system fans included in a system fan box (12x 3.5-inch version)
– two or three (redandant option) system fans included in a system fan box
(1CPU, 2.5-inch. variant and 8x 3.5-inch variant )
– three or four (redandant option) system fans included in a system fan box
(2CPU, 2.5-inch. variant and 8x 3.5-inch variant )
– up to two fans, that are integral parts of the power supply units and cannot
be replaced separately
I
The fan redundancy is optional availabe for all configurations, except for
the 12x 3.5-inch version. This system version is always assembled with
5 fans, without any redundancy
RX2520 M1
Upgrade and Maintenance Manual
"Important
163
Advertisement
Table of Contents
