Applying Thermal Paste - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Processor (CPU)

11.2.5 Applying thermal paste

I
For Japan, the service engineer must follow the instruction provided
separately.
I
If the CPU upgrade or replacement kit contains a new CPU heat sink, a
thin layer of thermal compound has already been pre-applied to its lower
surface. In this case, please proceed with section
heat sink" on page
Figure 225: Thermal paste syringe
One thermal compound syringe (FTS-FSP:P304000004) contains thermal
paste for three CPUs.
In order to determine the correct amount of thermal paste (equal to 1.0 gram),
divide the grey area of the syringe up into three equal segments.
I
Add graduation marks to the syringe using a permanent marker to help
you apply the thermal paste.
328
330.
Upgrade and Maintenance Manual
"Installing the CPU
TX1330 M4