Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual page 428

Appendix
Pos. Indicator
Power-off
1 indicator (AC
connected)
Power-on
2
indicator
428
Status Description
green on server is switched on and running
server is switched off, but mains voltage
is present (standby mode)
I
off
flashes slowly if iR4MC S is not ready.
green
I
flashing
slowly (1/2
Hz)
– the system is not connected to the
off
– the system is powered on and in
– the system is in power-off mode but
– the system has been switched on
green
Upgrade and Maintenance Manual
After connecting the server to the
mains it takes about 60 secondes
until the server enters the
standby mode.
This description is only valid for
systems with iRMC FW 7.3.xF
and higher!
mains
normal operation (S0)
connected to the mains (AC
connected)
and is in power-on delay
I
After connecting the server to
the mains it takes about 60
secondes until the server
enters the standby mode.
RX2520 M1