Preliminary Steps; Removing The Odd Dummy Module - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

12.5.1.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 51
Ê
"Disconnecting power cords" on page 52
Ê
"Getting access to the component" on page 53
Ê
"Removing the fan box" on page 168
Ê

12.5.1.2 Removing the ODD dummy module

Figure 152: Removing the ODD dummy module
Ê Pull the locking latch upward to unlock the ODD dummy module.
V
CAUTION!
Save the ODD dummy module for future use.
Always replace dummy modules into unused drive bays to comply with
applicable EMC regulations and satisfy cooling requirements.
RX2520 M1
Upgrade and Maintenance Manual
Accessible drives
263