Accessible drives
Ê Push the LTO cage into the bay.
Figure 194: Connecting the cables to the LTO4/5
Ê Fasten the drive cage with the screw (1).
Ê For LTO4/5 drives:
Connect the cable to the LTO drive (2), to the power cable (3) and to the
system board (4) as shown in
Ê For LTO3 drives: Connect the cables as shown in
V
CAUTION! (applies for LTO3 drives)
For connection to the power supply, do not use the short end of cable
C18. Use the separate cable C16!
Figure 195: Connecting the cables to the LTO3
300
figure
C18
Upgrade and Maintenance Manual
194.
figure 277
or
figure
282.
C16
RX2520 M1