Removing The 3.5-Inch Hdd Sas / Sata Backplane - Fujitsu PRIMERGY RX2520 M1 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY RX2520 M1:

Table of Contents

Hard disk drives / solid state drives

Ê Push the holder few millimeters in the direction of the arrow (2).

Ê Remove the pass-through/expander board (3).

Removing the 3.5-inch HDD SAS / SATA backplane

Figure 60: Disconnecting cables from the 3.5-inch HDD SAS / SATA backplane

Ê Remove the holder.

Ê Remove the four screws.

Ê Disconnect the cables from the 3.5-inch HDD SAS / SATA backplane.

Figure 61: Removing the 3.5-inch HDD SAS / SATA backplane (A)

Upgrade and Maintenance Manual