To Check/Control Spool Jobs - Konica Minolta bizhub pro 1050 User Manual

To Check/Control Spool Jobs

Use this function to display spool jobs as a list.
The list includes following information.
• Job No.: consecutive numbers of both copy and print jobs
• Mode: Wait for RIP or Receiving (current status of the spool job)
Follow the procedure below to change the output order or delete the spool jobs.
1.
Touch JOB LIST tab on the Copy Screen, then touch Spool.
Check the status of the spool jobs.
Touch Next to scroll, if 8 or more jobs are entered.
2.
Select the desired job, then select the job operation.
To specify the next job to be printed:
Touch to highlight the desired job key, then touch Print Next.
The highlighted job will be moved just under the current print job.
This will not function if printing operation has already been started for the
selected job.
To change the order of jobs:
Touch to highlight the desired job key, then touch Priority.
The highlighted job will be advanced by one in printing order unless the job
preceding the selected one is already in progress.
If printing order cannot be changed for the selected job, a message will be
displayed for information.
To clear spool job:
Touch to highlight the desired job key, then touch Delete.
Touch Yes on the popup menu to clear the selected job.
All the data of the selected job will be cleared.
10-10
Job Operation on Job List Screen (continued)