To Stop Scanning/Printing; To Stop Scanning Or Printing Job - Konica Minolta bizhub pro 920 Copier Manual

Before Making Copies
8.6

To Stop Scanning/Printing

Follow the procedure below to stop scanning or printing.
Note
This procedure is effective only for the job in progress.
To stop scanning for reserve job, stop the printing job first, then operate
for the reserve job.
!
Detail
To stop the reserved job on standby, operate on the Job List Screen. See
page 13-3 for details.

To stop scanning or printing job

1
Press [Stop] while the current job is in progress.
– If the direct selection screen is specified as the Basic Screen, touch
Stop in the setting image area.
The current machine operation of the selected job will be suspended,
and the popup menu will be displayed on the Basic Screen.
bizhub PRO 920
8
8-21