Specifying Transmission Settings ("Tx Operation" Menu); To Select The "Tx Operation" Menu - Konica Minolta 7115F Instruction Manual

Initial Set Mode – Fax Functions
10.2 Specifying Transmission Settings ("TX
OPERATION" Menu)
From the "TX OPERATION" menu, various functions for sending faxes
can be set.
"TX OPERATION" menu:
No. TX OPERATION
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
5 OT-DIAL IN COPY

To select the "TX OPERATION" menu

1
Press the [INITIAL SET] key.
The first screen of the Initial Set
mode appears.
2
Press the [ ] key 7 times to select
"TX OPERATION".
Konica 7115F/7118F
Characteristic/Description
This function can be used to set the default scanning
contrast level to one of five settings between "LIGHT" and
"DARK".
For dark-colored paper (media), select a setting towards
"LIGHT". For faint or colored text, select a setting toward
"DARK".
This function can be used to set the default scanning
resolution (image quality) to one of the following: "Normal",
"Fine", "Super Fine", "Photo + Normal", "Photo + Fine" or
"Photo + Super Fine".
• The manufacturer's default setting is "Normal".
This function can be used to set the default transmission
mode to "MEM.TX" or "ADF TX".
• The manufacturer's default setting is "MEM.TX".
This function cannot be set on this machine. (Printing of the
name of the transmission source on the edge of the
document transmitted is fixed by the settings.)
This function can be used to specify whether or not faxing is
possible by pressing a one-touch dial key while the machine
is in Copy mode.
• The manufacturer's default setting is "DISABLE".
10
10-35