Specifying Transmission Report Settings (Tx Settings) - Konica Minolta bizhub 362 User Manual

Specifying management settings
10.3

Specifying transmission report settings (TX Settings)

You can specify the default settings for transmission.
Settings can be specified for the following.
Item
Quality/Mode
Default Quality
Default Density
Communication Mode
Comm. Menu
TSI
Rotation TX
2-Sided TX
bizhub 362/282/222
Description
Specify the quality default value that is reset after an operation
is completed.
Specify the density default value that is reset after an operation
is completed.
Specify the communication mode default value that is reset af-
ter an operation is completed. Select from PC (e-mail) or Inter-
net FAX (Internet FAX).
Select the transmission source name.
OFF: Does not attach the transmission source name.
Inside Body Text: Prints the transmission source name on the
original document.
Outside Body Text: Does not print the transmission source
name on the original document.
Specify whether to reset the rotation transmission after an op-
eration is completed.
Specify whether to reset the duplex transmission after an oper-
ation is completed.
10
10-7