Co Line Name / Label Programming - Comdial DX-80 Installation & Maintenance Manual

Program Call Abandon Timers as required to match the CO operation.
¢£¤¥
•
Use to highlight "Call Handling." Then press
¢£¤¥
•
Use to highlight "Category 1" and then press
Category 1 : [1/2]." The "[1/2]," indicates that this is the first of two pages for this programming category.)
³ ´
•
Press or to select page 2.
¢£¤¥
•
Use
«
•
Press to change the data.
•
Input the new data for this database item. (Accepted entries are 50-1000, in increments of 50.)
«
•
Press to temporarily store this data.
¢£¤¥
•
Use to highlight the next database item to be changed.
•
Continue programming other database items as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

CO Line Name / Label Programming

Naming (or labeling) of CO Lines is provided to customize the appearance of the line identifier in the telephone
display when the CO Line is in use. This labeling can assist users when handling CO Line calls by orienting the line to
its intended purpose.
Default Settings
System Resource – CO Line Names; CO Lines are named "LINE 1" through "LINE 16" for CO Line directory
numbers 740-755 sequentially.
Programming Abstract
Program – CO Lines as required for customized names. (7 characters maximum)
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight the database item requiring change (Talk or Hold Abandon Time).
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
M M
AINTENANCE ANUAL
«
.
«
. (Notice the display header "Call Handling –
°
(escape) key to exit this database programming
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
3-73