Copier Setting; Printer Settings - Oce CS250 User Manual

Utility mode

Copier setting

Parameter
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Print Jobs During Copy
Operation
Tri-Fold Print Side
Automatic Image Rotation

Printer settings

Parameter
USB Timeout
Network Timeout
CS250/CS240/CS231
Description
Select whether or not the "Auto" Zoom setting is automatical-
ly selected when a paper tray is selected (except when the
"Auto" Paper setting is selected) while a document is placed
on the original glass.
Select whether or not the "Auto" Zoom setting is automatical-
ly selected when a paper tray is selected (except when the
"Auto" Paper setting is selected) while a document is loaded
into the ADF.
Select which paper tray is selected when the "Auto" Paper
setting is canceled.
• Tray Before APS ON:
The paper tray that was being used before the "Auto" Pa-
per setting was selected is selected.
• Default Tray:
Tray 1 is used.
Select the default paper tray loaded with paper for the cover
pages (front cover), inserted pages and chapter title pages.
Select whether or not print data or fax data can be accepted
for printing while a copy operation is being performed.
• Accept:
Print data and fax data can be accepted and printed.
• Receive Only:
Print data and fax data is printed after the copy operation
is finished.
Select whether the printed side is on the inside or the outside
when the page is folded in three.
This parameter is available only if optional Finisher FS-608 is
installed.
Select whether or not the image is automatically rotated when
the document and copy paper orientations are different.
• When Auto Paper / Auto Zoom / Reduce is set:
If the "Auto" Paper setting, "Auto" Zoom setting or a Re-
duce setting is selected, the image is automatically rotat-
ed to fit the orientation of the paper.
• When Auto Paper / Auto Zoom is set:
If the "Auto" Paper setting or "Auto" Zoom setting is se-
lected, the image is automatically rotated to fit the orien-
tation of the paper.
• When Auto Zoom / Reduce is set:
If the "Auto" Zoom setting or a Reduce setting is select-
ed, the image is automatically rotated to fit the orientation
of the paper.
• When Auto Zoom is set:
If the "Auto" Zoom setting is selected, the image is auto-
matically rotated to fit the orientation of the paper.
Description
Specify settings for registering print destinations. For details, refer to the User
manual – Print Operations.
13
Default Setting
OFF
ON
Tray Before APS ON
Tray 2
Accept
Outside
When Auto Paper/Au-
to Zoom is set
13-33