Oce CS250 User Manual page 167

Basic copy operations
The following Finishing settings are available.
Setting
Sort
Group
Offset
Fold/Bind
Center Staple/Fold
Output Tray
CS250/CS240/CS231
Description
Select this setting to separate each set of a multi-page document.
Select this setting to separate the copies of each page in a multi-page docu-
ment.
If no finisher is installed
If the sorting conditions are met, printed copies are fed out and sorted in an
alternating crisscross pattern.
If a finisher is installed
The copies are fed out and stacked on top of each other with each set shifted
to separate it.
Select one of these settings to fold copies. The copies can also be bound with
staples at the same time.
Fold/Bind setting can be used if optional finisher FS-608 is installed.
Select this setting to fold copies. The copies can also be bound with staples at
the same time.
The "Center Staple & Fold" setting can be used if the saddle stitcher is installed
on optional finisher FS-519.
Select the output tray where the finished copies are to be fed.
This setting can be used if optional finisher FS-519 is installed.
4
4-61