Erasing Specified Areas Of Copies ("Frame Erase" Function) - Oce CS250 User Manual

9
9.19

Erasing specified areas of copies ("Frame Erase" function)

Copies can be produced by erasing unwanted areas around the document, such as the transmission
information on received faxes and the shadows of punched holes.
With frame erasing, the same width can be erased along all four sides of the document or a different width
can be erased along each side of the document.
1
Position the document to be copied.
– For details on positioning the document, refer to "Feeding the document" on page 4-8.
2
Touch [Application], and then touch [Frame Erase].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Frame Erase screen appears.
3
Touch the button for the desired position to be erased.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Frame Erase" function, touch [No].
What happens when [Frame] is selected?
?
% The same width is erased on all four sides of the original. The factory default setting is "Frame".
? Can the settings be combined?
% "Frame" cannot be combined with the other settings ("Top", "Left", "Right" or "Bottom").
9-74
Application functions
A: 0.1 mm to 50.0 mm
CS250/CS240/CS231