Oce CS250 User Manual page 327

Copy paper/original documents
5
Specify the X and Y sides of the paper, and then touch [Store].
– Make sure that [X] is selected, and then use the keypad to type in the length of side X (between 139.7
mm and 457.2 mm).
– Touch [Y] to select it, and then use the keypad to type in the length of side Y (between 90.0 mm and
311.1 mm).
– Check the illustration in the screen for the sides that are considered X and Y.
– If a value outside the allowable range is specified, the message "Input error" appears. Type a value
within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the keypad to erase the value, and
then specify the correct value.
To cancel changes to the settings, touch [Cancel].
6
Touch the memory button where the paper size is to be stored.
– To change the name of a memory key, touch [Change Custom Size Name], and then touch the key
to be renamed.
CS250/CS240/CS231
8
8-15