Oce CS250 User Manual page 277

Troubleshooting
4
Raise lever FN1, turn dial FN2, and then pull out any paper.
5
Lower guide FN3, and then pull out any paper.
– If the punch kit is installed, pull out the hole-punch waste
container FN3.1.
6
Return guide FN3 to its original position.
– If the punch kit is installed, insert the hole-punch waste container FN3.1 into its original position.
7
Turn dial FN4 to feed the paper, open the transport unit cover,
and then pull out any paper.
CS250/CS240/CS231
FN4
6
6-53