Manually Using The Finisher - Oce CS250 User Manual

Basic copy operations
4.14

Manually using the finisher

If the post inserter is installed onto the finisher, the finisher can be operated manually by using the control
panel of the post inserter.
The following Finishing settings are available with each of the option configurations.
Finisher FS-517 and post inserter
- "Corner Staple", "2 Position" Staple
Finisher FS-608 and post inserter
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
Finisher FS-517, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Punch settings
Finisher FS-608, post inserter and punch kit
- "Corner" Staple, "2 Position" Staple
- Center Staple & Fold
- Tri-Fold
- Punch settings
Corner Staple
Reminder
Only load paper into the lower tray. Do not use the upper tray.
"Corner" Staple,
"2 Position" Staple
Punch settings
CS250/CS240/CS231
2 Position Center Staple
Staple
Paper weight
Plain paper (64 to
2
90 g/m )
Thick paper 1/1+/2 (91 to
2
209 g/m )
Plain paper (64 to
2
90 g/m )
Thick paper (91 to
2
128 g/m )
Tri-Fold
& Fold
Paper size Number of sets
A3w to A5v, Finisher FS-517:
*
12-1/4×18w , 50 sets
11×17w to 5-1/2×8-
Finisher FS-608:
1/2w/v, 8×13w,
50 sets (64 to
16Kw/v, 8Kw
80 g/m
16 sets (81 to
90 g/m
When Punch kit 200 sets
PK-512 is installed:
A3w to A5v,
11×17w to 5-
1/2×8-1/2w, 8×13w,
16Kw/v, 8Kw
When Punch kit
PK-513 is installed:
A3w, B4w, A4v,
B5v, 11×17w,
8-1/2×11v,
7-1/4×10-1/2v,
16Kv, 8Kw
4
Punch
Output
tray
Finishing
tray 1
2
)
2
)
Finishing
tray 1
4-81