12
Checking job settings
Job settings for stored jobs, jobs being printed, jobs queued to be printed and held jobs can be checked.
1
Touch [Job List] in the left panel, and then touch [Job Details].
The Job List screen appears.
2
Display the list containing the job whose settings are to be checked.
3
Select the job to be deleted, and then touch [Check Job Set.].
–
If an incorrect job was selected, select a different job or touch the button for the selected job again
to deselect it.
–
The contents and number of Job Settings screens differ depending on the job that was selected.
–
The upper number to the left of [
The lower number indicates the total number of screens.
–
To display the previous screen, touch [
The Check Job Settings screen appears.
4
After checking the settings, touch [Close] or press the [Reset] key.
–
To return to the screen displayed before [Check Job Set.] was touched, touch [Close].
–
To return to the Basic screen, press the [Reset] key.
Checking job details
The following information can be checked from the Job List screen.
-
Print tab
Status (Receiving, PrintWait, Printing, StopPrint, Print Err, Job Stored)
Due To Error, Deleted by User, Reset Modes)
Tray, hours (Job Start, Job End), Prints (Original, # of Sets)
-
Send tab
Status (Transferring, Waiting, Dialing, Waiting To Redial)
Deleted by User)
Others), Dest (Detail
-
Receive tab
Status (Receiving, Dialing (only with polling reception), Print Wait, Printing, StopPrint, Print Err, Saving
to Memory)
*2
Details
-
Save tab
Status (Receiving, Saving to Memory)
Reset Modes)
(Original)
*1
Displayed only for jobs on the Current Jobs list
*2
Displayed only for jobs on the Job History list
*3
Displayed only for jobs on the Currently Jobs list transmitted to multiple destinations
*4
Displayed only with external server authentication
12-10
*2
, User Name, Document Name, Address Type (E-Mail, FTP, File (SMB), TWAIN, Fax,
*3
), hours (Job Start, Type), Prints (Document), External Server Information
*1
, Result (Job Complete, Deleted Due To Error, Deleted by User, Reset Modes)
, User Name, Document Name, Output Tray, hours (Job Start, Type), Prints (Document)
*2
*2
, Error Details
, User Name, User Box (box number/box name), hours (Job Start), Prints
Back] indicates the number of the currently displayed screen.
Back]. To display the next screen, touch [Forward
*2
*2
, Error Details
, User Name, Document Name, Output
*1
, Result (Job Complete, Deleted Due To Error,
*1
, Result (Job Complete, Deleted Due to Error, Deleted by User,
Managing jobs
*1
, Result (Job Complete, Deleted
*4
*2
, Error
CS250/CS240/CS231
].