Oce CS250 User Manual page 534

13
Parameter
Job Reset
Reminder
If user authentication or account track operations are being performed, they will be canceled after 1
minute, even if the "System Auto Reset" parameter has been set to "OFF". However, Enlarge Display
mode is not exited when the "System Auto Reset" parameter is set to "OFF".
If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",
the logoff from Administrator mode or user authentication mode will be performed according to the
"System Auto Reset Time" parameter.
User Box Settings
Parameter
Delete Unused User Box
Delete Secure Print Docu-
ments
Auto Delete Secure Docu-
ment
Encrypted PDF Delete
Time
Document Hold Setting
Stamp Settings
Parameter
Header/Footer Settings
Fax TX Settings
13-28
Description
When Account is Select whether or not the settings are reset (initial-
changed ized) when the user has changed.
This machine detects that the user has changed
when the optional key counter has been removed
or when the user has logged off if user authentica-
tion or account track settings are specified.
When original Select whether or not the settings are reset when
is set on ADF a document is loaded into the automatic docu-
ment feeder.
Next Job Staple Setting:
Select whether the same Staple setting from the
previous job is set or the setting is canceled when
that job begins and the settings for the next job
can be specified.
Original Set/Bind Direction:
Select whether the same Original Direction and
Binding Position settings from the previous job
are set or the settings are canceled when that job
begins and the settings for the next job can be
specified.
Reset Data After Job:
Select whether the same settings for a scan oper-
ation or for a fax transmission from the previous
job are set or the settings are canceled when that
job is completed and the settings for the next job
can be specified. (However, even if "OFF" is se-
lected, the destination is cleared.)
Description
Specify settings for using boxes. For details, refer to the User manual – Box Operations.
Specify settings for using boxes. For details, refer to the User
manual – Box Operations.
Description
Program or delete header/footer settings.
Select whether or not the stamp settings are canceled when
a fax is sent.
Utility mode
Default Setting
Reset
Do Not Reset
OFF
OFF
ON
Default Setting
1 day
1 day
ON
Default Setting
-
Cancel
CS250/CS240/CS231