Oce CS250 User Manual page 542

13
Enhanced Security Mode
Description
Settings necessary for applying enhanced security settings appear. Select whether or not to apply enhanced security
settings when the necessary settings are specified. For details, contact your technical representative.
HDD Settings
Parameter
Check HDD Capacity
Overwrite Temporary Data
Overwrite All Data
HDD Lock Password
Format HDD
HDD Encryption Setting
Function Management Settings
Parameter
Network Function Usage
Settings
!
Detail
The following functions cannot be used if "Network Function Usage Settings" is set to "OFF".
PC-FAX transmission
Using the HDD TWAIN driver to view and retrieve documents in user boxes
Using Box Operator to view and retrieve documents in user boxes
Using Scan Direct to retrieve documents in user boxes
Using Job Spooler to view and retrieve documents in user boxes
Box operations using the Web Connection (The User Box tab does not appear.)
Stamp Settings
Parameter
Apply Stamps
Delete Registered Stamp
13-36
Description
Information concerning the hard disk capacity is displayed.
Specify whether or not to overwrite the temporary image data
saved on the hard disk with all operations for copying, scan-
ning, faxing and computer printing. For details on the set-
tings, refer to the User manual – Box Operations. By
specifying a setting to overwrite temporary data, the area of
the hard disk where image data is saved after printing or
sending can be overwritten, and the data can be erased. This
process prevents disclosure of image data on the hard disk.
Select this parameter to overwrite all data on the entire hard
disk when returning or disposing of this machine in order to
prevent disclosure of the data. For details on the settings, re-
fer to the User manual – Box Operations. Before performing
this operation, contact your technical representative.
Specify the password for protecting data on the hard disk. For details, refer to the User
manual – Box Operations.
Format the hard disk. For details, refer to the User manual – Box Operations.
This parameter appears when the optional security kit is installed to specify encryption
of the hard disk. For details, refer to the User manual – Box Operations. When a setting
is specified, all data written to the hard disk is encrypted to protect it. If the encryption
key is changed, the hard disk will be reformatted.
Description
Specify settings for network functions that are difficult to
count when managing operations.
Description
Select whether or not a stamp is added when printing or sending.
Select whether or not stamps registered for copy protection can be deleted.
Utility mode
Default Setting
NO
Mode 1
Default Setting
ON
CS250/CS240/CS231