Oce CS250 User Manual page 525

Utility mode
Parameter
Default Copy Settings
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
Tri-Fold Print Side
Print Jobs During Copy
Operation
CS250/CS240/CS231
Description
Specify the default settings for Copy mode.
The copy settings selected when the machine is turned on
(the power switch is set to "n") or the [Reset] key is pressed
can be specified.
• Current Settings:
The settings specified from the touch panel before Util-
ity mode was entered are set as the default settings for
Copy mode.
• Factory Default:
The factory default settings are set as the default set-
tings for Copy mode.
Select whether copies are printed as the document is being
scanned or after the entire document has been scanned
when scanning a document in separate batches or when
scanning a multiple-page document from the original glass.
• Page Print:
Printing of copies that can be printed begins while the
document is being scanned.
• Batch Print
Printing begins after all pages of the document have
been scanned.
Select whether an image that exceeds 297 mm in the main
scanning direction (left/right direction on the original glass
and ADF) is rotated when the copies are printed.
• Allow:
An enlargement rotation is performed. However, this is
applied only when the "Black" Color setting is selected.
• Restrict:
The enlargement rotation is prohibited, regardless of
the selected Color setting.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while a document is
placed on the original glass.
Select whether or not the "Auto" Zoom setting is automat-
ically selected when a paper tray is selected (except when
the "Auto" Paper setting is selected) while a document is
loaded into the ADF.
Select which paper tray is selected when the "Auto" Paper
setting is canceled.
• Tray Before APS ON:
The paper tray that was being used before the "Auto"
Paper setting was selected is selected.
• Default Tray:
Tray 1 is used.
Select the default paper tray loaded with paper for the cov-
er pages (front cover), inserted pages and chapter title pag-
es.
Select whether the printed side is on the inside or the out-
side when the page is folded in three.
This parameter is available only if optional Finisher FS-608
is installed.
Select whether or not print data or fax data can be accept-
ed for printing while a copy operation is being performed.
• Accept:
Print data and fax data can be accepted and printed.
• Receive Only:
Print data and fax data is printed after the copy opera-
tion is finished.
13
Default Setting
Factory Default
Page Print
Restrict
OFF
ON
Tray Before APS ON
Tray 2
Outside
Accept
13-19