Cover Sheet Feeder Size Adjustment - Oce CS250 User Manual

13
6
Press the [Start] key.
Automatic adjustment of the punched hole edge sensor begins.
Once the adjustment is completed, the results screen appears.
7
Touch [Close].

Cover Sheet Feeder Size Adjustment

The sensors for detecting the size of paper loaded in the paper trays of the optional post inserter can be
adjusted.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Settings screen, refer to "Displaying the administrator
settings screen" on page 13-37.
2
Touch [1 System Settings].
The System Settings screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [Forward
The Cover Sheet Tray Size Adjustment screen appears.
6
Load the selected paper in the paper tray for the post inserter, and then press the [Start] key.
7
Touch [Close].
13-60
], and then touch [4 Cover Sheet Feeder Size Adjustment].
Utility mode
CS250/CS240/CS231