Oce CS250 User Manual page 555

Utility mode
5
Touch [Center Staple Position].
The Center Staple Position screen appears.
6
Touch the button for the paper size to be adjusted.
– If the paper size to be adjusted is not displayed, touch
displayed.
– If the saddle stitcher is installed on optional finisher FS-519, touch buttons for the paper size and
for the paper type.
7
Compare the width of the left pages of the copy sample with the width of the right pages to check for
the center of the paper.
– If the staple position is too far to the left of the center of the paper, touch [+] to increase the
adjustment.
– Each time [+] or [-] is touched, the value is increased or
decreased by one increment.
CS250/CS240/CS231
Finisher FS-608
Finisher FS-519 + Saddle stitcher
and until the desired paper size is
13
13-49