Oce CS250 User Manual page 531

Utility mode
Expert Adjustment
Parameter
AE Level Adjustment
Printer Ad-
justment
Finisher
Adjustment
CS250/CS240/CS231
Description
Specify the initial value for auto exposure (AE) be-
tween 0 and 4. The higher the setting, the more
that the document background is emphasized.
Leading Edge Adjust the starting print position between -3.0 and
Adjustment 3.0 mm at the leading edge of the paper (with re-
spect to the paper feed direction). Adjustments
can be specified for each paper type.
Centering Adjust the starting print position between -3.0 and
3.0 mm at the left edge of the paper (with respect
to the paper feed direction). Adjustments can be
specified for each paper tray.
Leading Edge Ad- Adjust the starting print position between -3.0 and
justment (Duplex 3.0 mm at the leading edge of the paper for the
Side 2) second side during automatic double-sided cop-
ying. Adjustments can be specified for each paper
tray.
Centering (Duplex Adjust the starting print position between -3.0 and
2nd Side) 3.0 mm at the left edge of the paper for the sec-
ond side during automatic double-sided copying.
Adjustments can be specified for each paper tray.
2-Position Staple Adjust the distance (between 128 mm and
*1
Pitch Adjustment 160 mm) between staples when printing with the
"2 Position" Staple setting ("Staple" and "Center
Staple & Fold").
Center Staple Po- Adjust the stapling position (between -12.8 and
*1
sition 12.7 mm) when printing with the "Center Staple &
Fold" setting.
Half-Fold Posi- Adjust the folding position (between -12.8 and
*1
tion 12.7 mm) when printing with the "Center Staple &
Fold" setting.
Tri-Fold Position Adjust the folding positions (between -12.8 mm
*1
Adjustment and 12.7 mm) when printing with the "Tri-Fold"
setting.
Punch Vertical Po- Adjust the vertical position of the punched holes
sition Adjust- between -5 mm and 5 mm.
*1
ment
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes between -5 mm and 5 mm.
*1
ment
Punch Resist Loop Adjust the hole-punching shift for double-sided
*1
Size Adjustment printing and outputting cover pages between -
16.0 mm and 16.0 mm.
Punch Edge Sen- Adjust the sensors for detecting the paper edges
*1
sor Adjustment when printing with a Punch setting.
Center Staple Po- Adjust the stapling position (between -10 mm and
*2
sition 10 mm) when printing with the "Center Staple &
Fold" setting.
Half-Fold Position Adjust the folding position (between -10 and 10
*2
mm) when printing with the function for folding
copies in half.
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes (between -10 and 10 mm) for each paper
*1
ment type.
Punch Resist Loop Adjust the hole-punching shift (between -4 and 4
*1
Size Adjustment mm) for double-sided printing and outputting cov-
er pages.
Cover Sheet Feed- Adjust the sensors for detecting the size of paper
er Size Adjustment loaded in the paper trays of the post inserter.
*3
13
Default Setting
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
128 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
-
0.0 mm
0.0 mm
0.0 mm
0.0 mm
Upper Tray, A4 w
13-25