Oce CS250 User Manual page 420

9
4
Select the desired stamp under "Stamp Type/Preset Stamps" or "Stamp Type/ Registered Stamps".
– Touch
– Only one stamp can be selected.
5
Select the desired setting under "Pages".
– To print the stamp only on the front cover, touch [1st Page Only].
– The stamp will not be printed on blank pages inserted using the "Cover Sheet", "Insert Sheet" and
"Chapters" functions.
6
Touch [Print Position], and then select the printing position.
– To make fine adjustments to the printing position, touch [Adjust Position]. Select the desired
direction under "Left & Right Adjustment" or "Top & Bottom Adjustment", use the keypad or touch
[–] and [+] to specify the adjustment setting, and then touch [OK].
? What are the limits on the adjustment amount?
% The print position can be finely adjusted in 0.1 mm increments.
Can no adjustments be made?
?
% To make no left/right or up/down adjustments, touch [No Adjustment].
9-84
or to display a different list of preset or registered stamps.
Application functions
CS250/CS240/CS231