Setting The "Message Display Time" Function - Oce CS250 User Manual

5

Setting the "Message Display Time" function

It is possible to specify the length of time for displaying warning messages, which appear, for example, when
an incorrect operation is performed.
As the factory default, "3 seconds" is selected.
1
Display the Accessibility Setting screen, and then touch
– For details on displaying the Accessibility Setting screen, refer to "Displaying the accessibility
setting screen" on page 5-19.
2
Touch [Message Display Time] or press the [1] key in the keypad.
The Message Display Time screen appears.
3
Select setting for the desired amount of time that messages are displayed.
– Touch [3 seconds] or [5 seconds] to select how long messages are displayed.
– To cancel changes to the settings, press the [Reset] key. All changes to the settings are canceled.
4
Touch [OK].
The Accessibility Setting screen appears again.
5
Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
5-28
Additional copy operations
to display the next screen.
CS250/CS240/CS231