Oce CS250 User Manual page 584

13
18
Touch [Total Allowance] or [Individual Allowance].
– To specify the maximum number of combined color and black prints allowed, touch [Total
Allowance].
– To separately specify the maximum number of color and black prints allowed, touch [Individual
Allowance].
– To specify no maximum for color and black prints, touch [No Limit].
19
Touch [Total], [Color] or [Black], and then use the keypad to type in the desired value.
– Touch [All Users] to apply the settings in the current screen to all registered users. Touch [All Users],
touch [OK], and then touch [OK] in the next screen that appears.
20
Touch [OK].
The maximum number of prints allowed is set.
21
To use authentication unit (biometric type) or authentication unit (IC card type), touch [Register Auth.
Info.].
– [Register Auth. Info.] appears only if an authentication unit (biometric type) is installed on this
machine.
– For details on using the authentication unit (biometric type), refer to the user manual for the
authentication unit (biometric type).
The Register Auth. Info. screen appears.
22
Touch [Edit].
– When using authentication unit (biometric type), place a finger on the authentication unit and
register the vein patterns.
– When using authentication unit (IC card type), place an IC card on the authentication unit and
register the card information.
23
Touch [Function Permission].
The Function Permission screen appears.
13-78
Utility mode
CS250/CS240/CS231