Emptying The Punch Scrap Box - Oce CS250 User Manual

10
10.5

Emptying the punch scrap box

If the punch scrap box in the punch kit installed on the finisher becomes full, the message shown below
appears (if the box can be emptied by the user).
Note
The setting for emptying the punch scrap box should be specified by the technical representative. For
details, contact the technical representative.
The default setting is "Service". If a message appears, immediately contact the technical
representative.
Screen when a Punch setting is selected
10-34
Replacing toner cartridges and staples and emptying punch scrap box
CS250/CS240/CS231