Oce CS250 User Manual page 499

Managing jobs
4
Check the information that is displayed, touch [Yes] if the correct job is indicated, and then touch [OK].
– To quit deleting the job, touch [No], and then touch [OK].
The screen displayed before [Delete] was touched appears again, and the job is deleted from the
Current Jobs list.
5
Touch [Close] or press the [Reset] key.
The Basic screen appears again.
Note
If user authentication settings have been applied and the machine is set so that jobs cannot be deleted
by other users, the job is not deleted.
A job being performed can also be deleted by selecting the job in the sub display area, then touching
[Delete].
CS250/CS240/CS231
12
12-9