Oce CS250 User Manual page 533

Utility mode
!
Detail
For the procedure on adjusting the printer, refer to "Printer adjustment" on page 13-42.
For the procedure on adjusting the finisher, refer to "Finisher adjustment" on page 13-47.
For the procedure on adjusting the color registration, refer to "Color registration adjust" on page 13-61.
For the procedure on adjusting the gradation levels, refer to "Gradation adjustment" on page 13-63.
[Finisher Adjustment] appears only when an optional finisher is installed.
The Finisher Adjustment parameters that are available differ depending on the model of the installed
finisher.
Only "Black Image Density" is available for OHP transparencies.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Settings
Parameter
System Auto Reset
Auto Reset
CS250/CS240/CS231
Description
Job Settings List The machine settings can be printed.
Store combinations of paper sizes and paper types to be
counted.
Description
Specify the desired length of time until the auto-
matic system reset operation is performed.
• Priority Mode:
Select the setting ("Copy" or "Scan/Fax") for
the mode that the machine enters when the
automatic system reset operation is per-
formed.
• System Auto Reset Time:
Specify the setting (between 1 and 9 minutes
or "OFF") for the desired length of time until
the automatic system reset operation is per-
formed.
Select the setting (between 1 and 9 minutes or
"OFF") for the desired length of time until the au-
tomatic panel reset operation is performed for
each mode (Copy and Scan/Fax).
13
Default Setting
Priority Mode:
Copy
System Auto Reset
Time: 1 minute
Copy: 1 minute
Scan/Fax: 1 minute
13-27