Oce CS250 User Manual page 189

Basic copy operations
3
Press the [Finishing] key or [Punch] key, and then select the desired Finishing settings.
– When the "Corner" or "2 Position" Staple settings, or the "Center Staple & Fold" or "Tri-Fold" setting
is selected, press the [Finishing] key, and the indicator lights up. When a Punch setting is selected,
press the [Punch] key, and the indicator lights up.
– A Punch can be selected at the same time as the "Corner" or "2 Position" Staple setting. If the
settings are selected at the same time, the indicator lights up when the [Finishing] key is pressed.
When only a Punch setting is selected, all indicators except the one on the [Punch] key go off.
4
Press the [Start/Stop] key.
– Press the [Start/Stop] key during an operation to stop the operation.
CS250/CS240/CS231
4
4-83