Page 2
Océ-Technologies B.V. Copyright 2008,Océ-Technologies B.V. Venlo, The Netherlands. All rights reserved. No part of this work may be reproduced, copied, adapted, or transmitted in any form or by any means without written permission from Océ. Océ-Technologies B.V. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.
08 Curl Adjustment (FS-520/FS-607) ....................3-36 05 Density Unevenness Adjustment .................... 3-37 Utility screen outlines Chart of setting items on utility screen ..................4-3 Function list of user setting......................4-9 Function list of machine administrator setting................4-14 CS655 Pro Contents-1...
Page 9
No part of this manual may be used or duplicated without permission. Manufacturer and Sales Company will have no liability for any influences caused by using the printing system and this User’s Guide. The information written in this User’s Guide is subject to change without prior notice. CS655 Pro...
Please refer to this guide for how to use the Security Strengthen mode, and for detailed machine operation in Security Strengthen mode. To operate safely, be sure to read "Chapter 1 Safety Information" in "CS655 Pro User’s Guide - Copier" before using the machine.
After completing the Paper Setting mode settings, touch [Close] to exit the Paper Setting mode. Any other settings are unavailable during the Paper Setting mode. Note The Utility Screen refers to any screen that is displayed when [Utility/Counter] is pressed. CS655 Pro...
Page 12
After completing the Adjustment mode settings, touch [Exit] to exit the Adjustment mode. [Controller] key: The controller setting menu screen is displayed Specify the settings concerning the optional Print Controller. For the details, see User’s Guide enclosed with Image controller. Touch the [MACHINE] tab to exit the Controller Setting mode. CS655 Pro...
Please contact your service representative to set up your password. [Close] and [Exit] on the utility screen Touch [Close] to return to the previous screen. Touch [Exit] to return to the screen displayed before pressing [Utility/Counter] on the control panel. CS655 Pro...
This adjustment can be performed using a chart in Paper Setting accessed only from Copy Screen and Machine Status Screen. Process adj. Usually, this adjustment is not available. Contact your service representative for detail. Collective adjustment of the process adjustment for all tray is specified with the Machine Admin. Setting. CS655 Pro...
Color Specific Color specific paper is the type of paper used for color copying to prevent color dulling on high quality paper. Select [Color Specific] for those trays that are used for color specific paper. CS655 Pro...
Page 19
Copy rate will be 45 cpm from 65 cpm (on A4 paper in simplex mode). Copy speed becomes slower. Copy rate will be 32 cpm from 65 cpm (on A4 paper in simplex mode). The coated paper of certain brand can not be used with installation environment. Contact your service representative. CS655 Pro...
Press [Utility/Counter] on the control panel. The Utility Menu Screen will be displayed. Touch [02 User Setting], [01 System Setting], and then [03 Feed Tray Setting]. Touch [01 Paper Setting]. The Paper Setting Menu Screen will be displayed. CS655 Pro...
Page 22
The Input Condition Screen will be displayed. Select the paper type. – Touch [Paper Type] to display the Paper Type Screen. – Select the desired paper type, and the touch [OK] to complete the setting. See page 2-4 for details of the paper types. CS655 Pro...
Page 23
– Enter the adjustment value as follows. Touch [Front] or [Back] on the Front and Back Page Adjustment Screen to select the printed side. Select the adjustment item (vertical zoom, horizontal zoom, vertical shift, horizontal shift, and Registration) CS655 Pro...
Page 24
Specify whether to punch holes on paper or not. – Select [Punched] or [No punched]. Specify whether to use color specific paper or not. – Select [Non White] or [White]. Specify the air assist setting. – Select [Auto], [On (Strong)], [On (Weak)], or [Off]. 2-10 CS655 Pro...
Page 25
Chart adjustment is available from the Paper Setting on the Copy Screen or Machine Status Screen only. Paper Setting of User Setting does not provide this function. Contact your service representative for details. Air assist setting will be effective only when tray 4 of Large Capacity Unit LU-202 is selected. CS655 Pro 2-11...
Press [Utility/Counter] on the control panel. The Utility Menu Screen will be displayed. Touch [02 User Setting], [01 System Setting], and then [03 Feed Tray Setting]. Touch [01 Paper Setting]. The Paper Setting Screen will be displayed. 2-12 CS655 Pro...
Page 27
Touch [Yes] to delete, or [No]. – Return to the Input Condition Screen. To delete multiple paper types, repeat steps 4 to 6. Touch [Close] on the Paper Setting Screen. – Touch [Exit] to return to the Copy Screen. CS655 Pro 2-13...
Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [01 Restart Timing Adjustment]. The Restart Timing Adjustment Screen will be displayed. Touch [COPY] tab. The Copy Screen will be displayed. Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. CS655 Pro...
Page 32
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -60 to +60, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro...
Fold the output sheet at the center to the direction of paper feed and measure the distance between the lines on both sides. If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The Centering Adjustment Screen will be restored. CS655 Pro...
Page 34
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -40 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro...
Touch [01 Machine Adjustment], [01 Printer Adjustment], and then [03 FD-Mag. Adjustment]. The FD-Mag. Adjustment Screen will be displayed. Touch the required item key. Touch [COPY] tab. The Copy Screen will be displayed. Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. CS655 Pro...
Page 36
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -100 to +100, 1 step = 0.01% Repeat the adjustment steps from 3 to 9 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro...
Touch the required item key. Touch [COPY] tab. The Copy Screen will be displayed. Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. Measure the resultant magnification perpendicular to the direction of paper feed. CS655 Pro...
Page 38
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -100 to +100, 1 step = 0.01% Repeat the adjustment steps from 3 to 9 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. 3-10 CS655 Pro...
Select A3 w/11" e 17" w paper, place the original of which a misalignment can be easily monitored on the original glass, then press [START]. Check the misalignment by comparing the original and the output. If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The Scanner Restart Timing Adjustment Screen will be restored. CS655 Pro 3-11...
Page 40
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -10 to +20, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. 3-12 CS655 Pro...
[START]. The sample pattern will be output. Check the misalignment by comparing the original and the output. If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The Scanner Centering Adjustment Screen will be restored. CS655 Pro 3-13...
Page 42
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -30 to +30, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. 3-14 CS655 Pro...
The sample pattern will be output. Check the magnification in the direction of paper feed by comparing the output and the original. If the desired result cannot be obtained, touch the [ADJUSTMENT] tab. The Scanner FD-Mag. Adjustment Screen will be restored. CS655 Pro 3-15...
Page 44
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -40 to +40, 1 step = 0.05% Repeat the adjustment steps from 3 to 7 until the desired result is obtained. Touch [Return] to restore the Adjustment Menu Screen. 3-16 CS655 Pro...
The Adjustment Menu Screen will be displayed. Touch [02 Image Quality Stability]. The Image Quality Stability Screen will be displayed. Select [Speed] or [Stability] for a copying or printing job. Touch [OK] to restore the Adjustment Menu Screen. CS655 Pro 3-17...
The Adjustment Menu Screen will be displayed. Touch [03 Execute Adjust Operation]. The Execute Adjust Operation Screen will be displayed. Touch an appropriate key to execute the adjustment operation. Touch [OK] to restore the Adjustment Menu Screen. 3-18 CS655 Pro...
Load the desired size of paper to be adjusted on a tray, select Fold&Staple and then press [Start] on the control panel. A sample pattern will be output. Check the misalignment center fold and position of staples on output sheets. CS655 Pro 3-19...
Page 48
Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other paper size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-20 CS655 Pro...
Check the misalignment (a) of the edge of the feeding sheets. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Half Fold Stopper Adjustment Screen will be restored. Display the required size key using up/down arrow keys, and touch it. CS655 Pro 3-21...
Page 50
When misalignment (a) of step 5 has occurred, enter the "+" value. Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-22 CS655 Pro...
Check the value of misalignment (a) between the center-fold line and punch position. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Vertical Position Adjustment Screen will be restored. Display the required size key using up/down arrow keys, and touch it. CS655 Pro 3-23...
Page 52
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-24 CS655 Pro...
Load the paper on the desired tray (main body tray or Paper inserter tray) to be adjusted, specify Punch, then press [Start] on the control panel. A sample pattern will be output. Check the distance (a) from the edge of the output sheet to the center of the punch hole. CS655 Pro 3-25...
Page 54
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other tray is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-26 CS655 Pro...
A sample pattern will be output. Check whether or not the punch position is skew on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Registration Adjustment Screen will be restored. CS655 Pro 3-27...
Page 56
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. 3-28 CS655 Pro...
Touch [04 Finisher Adjustment], [03 Punch Adjustment], and then [04 Paper Edged Detect Sensor Adj.]. The Paper Edged Detect Sensor Adjustment Screen is displayed. Touch [Start]. The adjustment result will be displayed. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro 3-29...
Load the desired size of paper to be adjusted on a tray, specify Tri-Fold, then press [Start] on the control panel. A sample pattern will be output. Check the folding positions on the output sheet. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The Tri-Fold Adjustment Screen will be restored. 3-30 CS655 Pro...
Page 59
Repeat steps 3 to 8 until the desired result is obtained. If adjustment in any other size is required, repeat steps 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro 3-31...
Select the folding method to be adjusted, then press [Start] on the control panel. A sample pattern will be output. Check the amount of staple pitch. If the desired result cannot be obtained, touch [ADJUSTMENT] tab. The 2 Position Staple Pitch Adjustment Screen will be restored. 3-32 CS655 Pro...
Page 61
Available range: +120 to +160, 1 step = 1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. If adjustment in any other folding is required, repeat steps from 3 to 9. Touch [Return] to restore the Adjustment Menu Screen. CS655 Pro 3-33...
Touch [Next] to display the PI 2 Tray Size Adjustment Screen. Load the A4 w or 8.5" e 11" w on the Lower tray of the Paper Inserter, and then touch [Start]. Touch [Return] to restore the Adjustment Menu Screen. 3-34 CS655 Pro...
The Adjustment Menu Screen will be displayed. Touch [04 Finisher Adjustment] and [08 Curl Adjustment]. The Curl Adjustment Screen will be displayed. Select the desired curl size to match with the current condition. Touch [OK] to restore the Adjustment Menu Screen. 3-36 CS655 Pro...
Touching [+]/[,] increases/decreases the adjustment value, and the control panel keypad can also be used to enter the value. – Touch [Y (or M/C/K) Clear] to clear all the adjustment values of that color. Touch [Invalid] of the color to be adjusted to change it to [Effect]. CS655 Pro 3-37...
Page 66
If the test pattern of the adjusted color only is desired, select [Single Color] or [Black] on the Copy Screen and change the print quantity to 1 before pressing [Start]. Touch [Return] to restore the Adjustment Menu Screen. 3-38 CS655 Pro...
[2] Buzzer for Job Stop Set [10] Key Re- sponse Time [11] Short Cut [01] Application Key Setting [02] Quality Ad- just. (Copy) [03] Quality Ad- just. (Scanner) [04] Quality Ad- just. Area Set [12] Service Port Device CS655 Pro...
Page 73
[02] User Authen- tication Set [03] Account Track [04] Without Au- thentication [05] Network [01] Machine NIC Setting Setting [02] E-Mail Initial Setting [06] Common Setting [07] Copy Set- ting [08] Scan Set- ting [09] System [01] Administra- Connection CS655 Pro...
Page 74
The adjustments accessed by selecting [03 Machine Admin. Setting] > [01 System Setting] > [05 Expert Adjustment] > [08 Execute Adjust Operation] are exactly the same as those on the Machine Status Screen displayed by selecting [Adjustment] > [03 Execute Adjust Operation]. CS655 Pro...
Select the initial screen to be displayed when the power switch is turned Machine/ Job List/ Copy 06 Preset Zoom Setting Fixed/Six type Modify predefined fixed ratios, and preset frequently used magnification Preset Zoom/Three type ratios. Fixed/Six type Preset Zoom/Three type CS655 Pro...
Page 76
Specify the initial values for the scanning functions when the machine is reset to the initial setting, such as by pressing [Reset] on the control pan- Scanner Setting (Original Setting/ Color/ Zoom/ Color Space/ Quality Ad- just./ Scan Size/ Resolution/ Simplex/Duplex/ Default Server) 4-10 CS655 Pro...
Page 77
Specify the conditions to be applied to [Non-Image Area Erase of orig]. Yes/ APS/AMS/ Except Orig. Glass (1:1) ADF Frame Erase Set to erase the frame when copying in ADF mode. None/ 1mm/ 2mm/ 3mm/ 4mm/ 5mm CS655 Pro 4-11...
Page 78
03 Reversed Text Enhancement Normal Specify the level of reversed text enhancement for printing. Strong+/ Normal/ Weak+ 04 Blur Prevention Specify whether to use the function to prevent blur for lines caused by thin line enhancement. Off/ On 4-12 CS655 Pro...
Page 79
Adj. Range: -5~+5 05 Density Unevenness Adj. Adj. Range: 0 Adjust the density unevenness of printed images. Adj. Range: -32~+31 08 Change Password Change a user password which the user has registered for user authenti- cation. Enter new password CS655 Pro 4-13...
Page 82
Register up to 5 templates which can optionally be used as a title when transmitting scanned data. 03 E-Mail Text Setting Register up to 5 templates which can optionally be used as body text when transmitting scanned data. 4-16 CS655 Pro...
Page 83
Pull scan: Permission/ Prohibition 05 Network Setting 01 Machine NIC Setting Set the NIC settings. IP Address, Subnet Mask, Gateway Address, DNS Server 1, DNS Server 2, Line Speed Setting 02 E-Mail Initial Setting Specify the initial settings for e-mail. CS655 Pro 4-17...
Page 84
Specify the conditions to be applied to [Non-Image Area Erase of orig]. Yes/ APS/AMS/ Except Orig. Glass (1:1) ADF Frame Erase Set to erase the frame when copying in ADF mode. None/ 1mm/ 2mm/ 3mm/ 4mm/ 5mm 4-18 CS655 Pro...
Page 85
E-Mail/ HDD/ FTP/ SMB/ QUEUE Compress Method Color/Gray Standard Select the default destination to be displayed when selecting the Scanner Screen. High Compress/ Standard/ Low Compress 09 System Connection 01 Administrator Start Touch Start when calling CSRC. Start CS655 Pro 4-19...
Page 86
12345678 02 HDD Lock Password Change the password when accessing data stored in HDD. 03 Overwrite image data Specify whether to overwrite image data. Yes/ No 04 Security Strengthen Set Set the Security Strengthen mode. On/ Off 4-20 CS655 Pro...
This section describes the user setting. How to display user setting menu screen Press the [Utility/Counter] on the control panel. The Utility Menu Screen will be displayed. Touch [User Setting]. The User Setting Menu Screen will be displayed. CS655 Pro...
Page 90
How to use [Close], layer keys, and [Exit] Touch [Close] to return to the previous screen. Touch the desired layer key on the left side area of the screen to jump to that screen. Touch [Exit] to restore the Copy Screen. CS655 Pro...
Select the desired language key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5.2.3 03 Feed Tray Setting \ 01 Paper Setting Please refer to "2 Paper setting" for the overview of, and instruction on, setting paper. CS655 Pro...
(+) and (,). Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
Touch [On] when ATS is used, and [Off] when ATS is not used. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
Switch the displayed unit for weight by touching [Unit Change]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
Large Capacity Unit. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Feed Tray Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-10 CS655 Pro...
Select the desired time to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-11...
Staple mode is automatically canceled after a job is completed with Staple sort mode On. Original Set/Bind Direction Select to reset or save the original direction setting made on the Special Original Screen and the binding position setting made on the Output Mode Screen after completion of each copying job. 5-12 CS655 Pro...
Page 99
There are two setting screens. Touch [Next] and [Previous] to switch between the screens. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-13...
Select the desired initial screen to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-14 CS655 Pro...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-15...
If the Auto Shut Off function is disabled, select [---min.]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-16 CS655 Pro...
Page 103
If the period of time selected for Auto Shut Off is shorter than that of for Auto Low Power, the period of time for Auto Low Power will be forcibly reset to the same period of time as Auto Shut Off. Auto Low Power will not function. CS655 Pro 5-17...
Use the touch panel keypad to enter the time difference between the Universal time and the local time in the machine setting area. (e.g. Enter "-0600" for six hours later than the Universal time.) – Touch [OK] to return to the Time and Date Setting Screen. 5-18 CS655 Pro...
Page 105
User setting Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-19...
– Touch [Off] to highlight it. The buzzer will go off. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. 5-20 CS655 Pro...
Page 107
Select the desired time to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Buzzer Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-21...
Select the desired time to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-22 CS655 Pro...
To set short cut keys to be displayed under [Quality Adjust.] on the Copy Screen, touch [02 Quality Adjust. (Copy) ]to display the Short Cut Key Setting Screen (Quality). – Touch appropriate keys to select up to 3 short cuts for [Quality Adjust.]. CS655 Pro 5-23...
Page 110
Display], touch [04 Quality Adjust. Area Set] to display the Short Cut Key Setting Screen (Quality) – Select either [Short Cut Display] or [Density Setting Display]. Touch [OK] to complete the setting. The Short Cut Key Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-24 CS655 Pro...
To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. Note When using the service port device, contact your service representative. CS655 Pro 5-25...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-26 CS655 Pro...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the System Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-27...
(Black mode). Note Thick Paper BK Mode key is not display normally. If the adjustment is provided, contact your service representative. 5-28 CS655 Pro...
Page 115
There are two setting screens. Touch [Next] and [Previous] to switch between the screens. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-29...
Choose Default Tray when Select the tray to be automatically selected when APS Tray/ Tray1/ Tray2/ APS Off APS is released. Tray3/ Bypass Tray/ Tray4 Scan prohibit (pull out tray) Set to stop scanning when pulling out the tray. On/Off 5-30 CS655 Pro...
Page 117
There are five setting screens. Touch [Next] and [Previous] to switch between the screens. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-31...
There are three setting screens. Touch [Next] and [Previous] to switch between the screens. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-32 CS655 Pro...
Touch [06 Printer Setting], and then [01 Gray Text Outline Enhance]. Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. CS655 Pro 5-33...
Page 120
Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. Touch [06 Printer Setting], and then [03 Reserved Text Enhancement]. 5-34 CS655 Pro...
Page 121
Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Printer Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-35...
Select the desired key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-36 CS655 Pro...
There are six setting screens. Touch [Next] and [Previous] to switch between the screens. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-37...
Available range: 0 to +6 Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-38 CS655 Pro...
Repeat the adjustment steps from 3 to 4 until the desired result is obtained. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-39...
Touching [+]/[,] increases/decreases the adjustment value, and the control panel keypad can also be used to enter the value. – Touch [Y (or M/C/K) Clear] to clear all the adjustment values of that color. Touch [Invalid] of the color to be adjusted to change it to [Effect]. 5-40 CS655 Pro...
Page 127
Screen and change the print quantity to 1 before pressing [Start]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Image Quality Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 5-41...
Reenter the new user password in [Check Input]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Setting Menu Screen will be restored. If further changes are required, touch the desired key. 5-42 CS655 Pro...
Page 129
Be sure to make the user authentication before accessing the User Setting Screen. The user password can not be changed without any user authentication made or if logged in user is different from the one who wants to change the password. CS655 Pro 5-43...
Administrator password. Contact your service representative for setting the password. How to access the machine administrator setting screen Press the [Utility/Counter] on the control panel. The Utility Menu Screen will be displayed. Touch [03 Machine Admin. Setting]. CS655 Pro...
Page 134
How to use [Close], layer keys, and [Exit] Touch [Close] to return to the previous screen. Touch the desired layer key on the left side area of the screen to jump to that screen. Touch [Exit] to restore the Copy Screen. CS655 Pro...
Touch [01 System Setting], and then [01 Power Save Setting]. Power Save Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 01 System Setting \ 07 Power Save Setting]. Please refer to page 5-16 for more information. CS655 Pro...
Touch [01 System Setting], and then [02 Time and Date Setting]. Time and Date Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 01 System Setting \ 08 Time and Date Setting]. Please refer to page 5-18 for more information. CS655 Pro...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
Touch to highlight the day(s) of the week to be set. More than one can be selected at a time. – Enter the On-time and Off-time using the touch panel keypad, and then touch Set after each entry. – Touch [OK] to restore the Weekly Timer On/Off Time Setting Screen. CS655 Pro...
Page 139
(ex. 7 min. is 07) using the touch panel keypad, and then touch Set. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro...
If you touch an already-highlighted key, it will not be changed. – If any change is made in the collective setting area, the Timer Action Change Confirmation popup screen will be displayed. 6-10 CS655 Pro...
Page 141
Touch the key for the desired day to activate the timer on the calendar displayed on the center of the screen. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-11...
Touch [Function Invalid] to deactivate the Lunch Hour Off function. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Weekly Timer Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-12 CS655 Pro...
When the password setting is 0000, Timer Interrupt can be used simply by pressing [Power Save] on the control panel, then on. In this case, you will be asked to enter the duration of use (a period of time to turn the machine power on). CS655 Pro 6-13...
Mode memory number, if required. Touching the locked key will clear the locking mark and release locking. Touching the key with a name not entered will not lock the key and will not display the lock mark 6-14 CS655 Pro...
Page 145
30 Mode memory can be stored. Use [Next] or [Previous] to display the desired Mode memory. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Lock/Delete Mode Memory Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-15...
Touch to highlight [Permission] or [Prohibition] for each item. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Reset Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-16 CS655 Pro...
Touch to highlight [Permit] or [Prohibit] for each item. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Operation Prohibit Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-17...
Touch appropriate keys to set required levels separately for [Color] and [Black]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. 6-18 CS655 Pro...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [02 Erase Adjustment]. The Erase Adjustment Menu Screen will be displayed. Touch [01 Non-Image Area Erase]. – Touch the desired key to highlight it. CS655 Pro 6-19...
Page 150
Touch the desired amount of outside area to be deleted. Touch [None] if deleting the outside area is not necessary. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. 6-20 CS655 Pro...
Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjustment], and then [01 Restart Timing Adjustment]. The Restart Timing Adjustment Screen will be displayed. Detail Please refer to page 3-3 for the details on the subsequent operations. CS655 Pro 6-21...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjustment], and then [02 Centering Adjustment]. The Centering Adjustment Screen will be displayed. Detail Please refer to page 3-5 for the details on the subsequent operations. 6-22 CS655 Pro...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjustment], and then [03 FD-Mag. Adjustment]. The FD-Mag. Adjustment Screen will be displayed. Detail Please refer to page 3-7 for the details on the subsequent operations. CS655 Pro 6-23...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], [03 Printer Adjustment], and then [04 CD-Mag. Adjustment]. The CD-Mag. Adjustment Screen will be displayed. Detail Please refer to page 3-9 for the details on the subsequent operations. 6-24 CS655 Pro...
Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. Measure the resultant restart timing. If the desired result cannot be obtained, touch the [UTILITY] tab. The Lead Edge Erase Adjustment Screen will be restored. CS655 Pro 6-25...
Page 156
Available range: -20 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 7 until the desired result is obtained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-26 CS655 Pro...
Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. Check the sample pattern. If the desired result cannot be obtained, touch the [UTILITY] tab. The Registration Loop Adjustment Screen will be restored. CS655 Pro 6-27...
Page 158
Available range: -99 to +99, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-28 CS655 Pro...
Select A3 w/11" e 17" w paper, then press [START]. The sample pattern will be output. Check the sample pattern. If the desired result cannot be obtained, touch the [UTILITY] tab. The Pre-registration Adjustment Screen will be restored. CS655 Pro 6-29...
Page 160
Available range: -20 to +40, 1 step = 0.1 mm Repeat the adjustment steps from 3 to 8 until the desired result is obtained. Touch [Return] to restore the Printer Adjustment Menu Screen. If further changes are required, touch the desired key. 6-30 CS655 Pro...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [04 Finisher Adjustment]. The Finisher Adjustment Screen will be displayed. Detail Please refer to page 3-19 for the details on the subsequent operations. CS655 Pro 6-31...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], [05 Expert Adjustment], and then [05 Scanner Adjustment]. The Scanner Adjustment Screen will be displayed. Detail Please refer to page 3-11 for the details on the subsequent operations. 6-32 CS655 Pro...
Use the touch panel keypad to enter the desired adjustment value, then touch [<<SET]. Available range: -3 to +3 Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-33...
Density Sensor]. Touch [Start] to display the value of toner density sensor. – To cancel the sensor, touch [Stop]. Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. 6-34 CS655 Pro...
Repeat the adjustment steps from 3 to 4 until the desired result is obtained. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Process Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-35...
Touch [COPY] tab. The Copy Screen will be displayed. Select A4 v/8.5" e 11" v paper, then press [START] on the control panel. The sample pattern will be output. The Printer Gamma Offset Adjustment Screen will be restored. 6-36 CS655 Pro...
Page 167
Touch to highlight [Y], [M], [C], or [K] as required, and enter values using the screen keypad, then touch [<<SET]. Repeat the adjustment steps from 3 to 6 until the desired result is obtained. Touch [Return] to restore the Process Adjustment Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-37...
Touch [COPY] tab. The Copy Screen will be displayed. Select A4 v/8.5" e 11" v paper, then press [START] on the control panel. The test chart will be output. The Printer Gamma Offset Automatic Adjustment Screen will be restored. 6-38 CS655 Pro...
Page 169
Touching [Adj. data reset] will display the Reset Confirmation popup menu. Touch [YES] to reset the adjustment value to the factory setting, or touch [NO] to cancel. Touch [Return] to restore the Quality Adjustment Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-39...
Select A4 v/8.5" e11" v paper, then press [START] on the control panel. The test chart will be output. The Printer Gamma Offset Automatic Adjustment Screen will be restored. Touch the desired item key to highlight it. 6-40 CS655 Pro...
Page 171
Touching [Adj. data reset] will display the Reset Confirmation popup menu. Touch [YES] to reset the adjustment value to the factory setting, or touch [NO] to cancel. Touch [Return] to restore the Quality Adjustment Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-41...
Adjustment operations can be set to the jobs whose priority is set to [Stability]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Quality Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. 6-42 CS655 Pro...
If screen type was changed, touch [Exit] on the Quality Adjustment Screen to display the Copy Screen. The gamma automatic adjustment will be performed. After the gamma adjustment is complete, adjust the printer gamma offset setting for the screen which was modified in the machine administrator setting. CS655 Pro 6-43...
Touch an appropriate key to select the adjustment operation. Touch [OK] to complete the operation. – To cancel the change, touch [Cancel]. In either case, the Expert Adjustment Menu Screen will be restored. If further changes are required, touch the desired key. 6-44 CS655 Pro...
Press [Start] on the control panel to start printing the selected list. To suspend printing, press [Stop]. Touch [UTILITY] tab to return to the List Print Screen. Touch Return to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-45...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [01 System Setting], and then [07 Size Setting]. The Size Setting Menu Screen will be displayed. 6-46 CS655 Pro...
Page 177
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. Touch [03 Orig.Glass Minimum Detect]. – Touch the desired size key to highlight it. CS655 Pro 6-47...
Page 178
Touch [05 ADF/Orig. Glass Priority]. – Touch the desired size key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. 6-48 CS655 Pro...
Page 179
Touch the desired size key to highlight it. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Size Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-49...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Machine Administrator Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-50 CS655 Pro...
Touch [01 Scanner Send Address], and then [01 Address Edit]. The Register/Edit Destination Address Screen will be displayed. Add, change or delete the E-Mail destination address. – To add the E-Mail destination address: Touch [E-Mail], and touch [Add] to display the Input Destination Address Screen. CS655 Pro 6-51...
Page 182
Touch [Change] to display the Input Destination Address Screen. Select the changing item from [Address], [Register Name] and [Search Character], and change it in the input screen. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-52 CS655 Pro...
Page 183
Touch [HDD], and touch [Add] to display the Input Destination Address Screen. Touch [Box Name] and display the screen for input. Repeat this operation for [Register Name] and [Search Character]. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. CS655 Pro 6-53...
Page 184
Touch the search key, [Other], [Common], or the arrow keys (+) and (,) to display the Register Name to be deleted, and touch to highlight it. Touch [Delete]. The Delete Confirmation popup screen will be displayed. Touch [Yes]. To suspend deleting, touch [No]. Touch [OK] to restore the Register/Edit Destination Address Screen. 6-54 CS655 Pro...
Page 185
Touch [OK] to restore the Register/Edit Destination Address Screen. – To change the FTP destination address: Touch [FTP]. Touch the search key, [Other], [Common], or the arrow keys (+) and (,) to display the Register Name to be changed, and touch to highlight it. CS655 Pro 6-55...
Page 186
Touch [Yes]. To suspend deleting, touch [No]. Touch [OK] to restore the Register/Edit Destination Address Screen. Add, change or delete the SMB destination address. – To add the SMB destination address: Touch [SMB], and touch [Add] to display the Input Destination Address Screen. 6-56 CS655 Pro...
Page 187
Select the changing item from [Register Name], [Search Character], [Host Address], [File Path], [Login Name] and [Password], and change it in the input screen. Set Daily Use by touching [On] or [Off]. Touch [OK] to restore the Register/Edit Destination Address Screen. CS655 Pro 6-57...
Page 188
[Common], or the arrow keys (+) and (,) to display the Register Name to be changed, and touch to highlight it. More than one can be selected at a time. Repeat this operation for [HDD], [FTP], and [SMB]. Multiple selection of [HDD], [FTP], or [SMB] is not permitted for a single group. 6-58 CS655 Pro...
Page 189
Touch [E-Mail], [HDD], [FTP], or [SMB] to select the item to modify, and make appropriated changes on the relevant screen. Touch [List] to view the e-mail address, HDD, FTP, and SMB which have been selected. Touch [OK] to return to the Destination List Screen. CS655 Pro 6-59...
Page 190
Touch the arrow keys (+) and (,) to display the Register Name to be deleted, and touch to highlight Touch [Delete]. The Delete Confirmation popup screen will be displayed. Touch [Yes]. To suspend deleting, touch [No]. Touch [Return] to restore the Scan Send Address Menu Screen. If further changes are required, touch the desired key. 6-60 CS655 Pro...
[OK]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Scan Send Address Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-61...
[OK]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Scan Send Address Menu Screen will be restored. If further changes are required, touch the desired key. 6-62 CS655 Pro...
[Warning Only]: The message "Copy limit reached" is displayed as reaching the upper limit, and the next job can be continuously executed. Detail It is recommended to distribute authentication for both the user and the section, otherwise either party cannot be assigned authentication if it is distributed to only one party. CS655 Pro 6-63...
Page 194
Touch [Next], and then select the desired key on the right side of "Upper Limit Achieve Movement". Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Auth./Account Track Menu Screen will be restored. If further changes are required, touch the desired key. 6-64 CS655 Pro...
Touch [04 User Auth./Account Track], [02 User Authentication Set], and then [01 Management Setting]. The Management Setting Screen will be displayed. Touch [Display] or [Not Display] on the right side of the "User Name List". Touch [Initial-setting restrictions] to display the Initial Limit Setting Screen. CS655 Pro 6-65...
Page 196
In either case, the Management Setting Screen will be restored. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Authentication Setting Screen will be restored. If further changes are required, touch the desired key. 6-66 CS655 Pro...
Touch [User Name] to display the input screen. Enter the user name and touch [OK]. You may enter 64 letters for the user name. For the details on entering texts in the input screen, see the appendix. CS655 Pro 6-67...
Page 198
Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to the user. Touch [From Address] to display the screen for entering the From address. Select an appropriate address or register a new address, and then touch [OK]. Touch [OK] to complete the setting. 6-68 CS655 Pro...
Page 199
Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to the user. Touch [From Address] to display the screen for entering the From address. Select an appropriate address or register a new address, and then touch [OK]. CS655 Pro 6-69...
Page 200
To delete user settings: Touch [Next] or [Previous] to display the user name to be deleted and touch to highlight it. Touch [Delete] to display the Delete Confirmation popup menu. Touch [Yes] to delete, or touch [No] to cancel. 6-70 CS655 Pro...
Page 201
Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to all users. Touch [OK] to complete the setting. Touch [Return] to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-71...
Touch [Next] or [Previous] to display the user name to reset the counter and touch to highlight it. Touch [Public] to reset the counter of the public user. The Counter List Screen will be displayed. Touch [Delete] to display the Delete Confirmation popup menu. Touch [Yes] to delete, or touch [No] to cancel. 6-72 CS655 Pro...
Page 203
Touch [Clear (Package)] to display the All Reset Counter Confirmation popup menu. Touch [Yes] to reset, or touch [No] to cancel. Touch [Return] to restore the User Authentication Setting Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-73...
Touch [Section Name] to display the input screen. Enter the section name and touch [OK]. You may enter eight letters for the section name. For the details on entering texts in the input screen, see the appendix. 6-74 CS655 Pro...
Page 205
Touch [Upper] to display the keypad which can be used to enter the upper limit. Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to the account. Touch [OK] to complete the setting. CS655 Pro 6-75...
Page 206
For the details on entering texts in the input screen, see the appendix. Touch [Color] or [Black] in the "Output Permission" to select the type of printing operation made available to the account. 6-76 CS655 Pro...
Page 207
To delete registered section settings: Touch [Next] or [Previous] to display the section name to be deleted and touch to highlight it. Touch [Delete] to display the Delete Confirmation popup menu. Touch [Yes] to delete, or touch [No] to cancel. CS655 Pro 6-77...
Page 208
Touch [Copy], [Scanner], or [Printer] in the "Useable Function" to specify the functions made available to all users. Touch [OK] to complete the setting. Touch [Return] to restore the Machine Administrator Setting Menu Screen. If further changes are required, touch the desired key. 6-78 CS655 Pro...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [04 User Auth./Account Track], [03 Account Track], and then [02 Account Counter]. The Section Counter List Screen will be displayed. Follow the instruction below to reset the counter. – To reset counter individually: CS655 Pro 6-79...
Page 210
Touch [Clear (Package)] to display the All Reset Counter Confirmation popup menu. Touch [Yes] to reset, or touch [No] to cancel. Touch [Return] to restore the Account Track Setting Menu Screen. If further changes are required, touch the desired key. 6-80 CS655 Pro...
Touch [Permission] or [Prohibition] separately under "Print" and the "Pull Scan". Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the User Auth./Account Track Setting Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-81...
Line Speed Setting: Specify the line speed of the network. Choose from the options provided. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Network Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-82 CS655 Pro...
Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Network Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-83...
(Black mode). Note Thick Paper BK Mode key is not display normally. If the adjustment is provided, contact your service representative. 6-84 CS655 Pro...
Page 215
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [06 Common Setting]. The Common Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 03 Common Setting]. Please refer to page 5-28 for more information. CS655 Pro 6-85...
Choose Default Tray when Select the tray to be automatically selected when APS Tray/ Tray1/ Tray2/ APS Off APS is released. Tray3/ Bypass Tray/ Tray4 Scan prohibit (pull out tray) Set to stop scanning when pulling out the tray. On/Off 6-86 CS655 Pro...
Page 217
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [07 Copy Setting]. The Copy Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 04 Copy Setting]. Please refer to page 5-30 for more information. CS655 Pro 6-87...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [08 Scan Setting]. The Scan Setting Screen will be displayed. Detail The following operation is equivalent to selecting [User Setting \ 05 Scan Setting]. Please refer to page 5-32 for more information. 6-88 CS655 Pro...
Follow the procedure on page 6-3 to display the Machine Administrator Setting Menu Screen. Touch [09 System Connection], and then [01 Administrator]. The Administrator Call Screen will be displayed. Touch [Start]. Touch [Return] to restore the System Connection Menu Screen. If further changes are required, touch the desired key. CS655 Pro 6-89...
Enter the new password. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-90 CS655 Pro...
Touch [Check Input] to enter the same new password, then touch [OK]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. CS655 Pro 6-91...
Touch [Yes] or [No]. Touch [OK] to complete the setting. – To cancel the change, touch [Cancel]. In either case, the Security Setting Menu Screen will be restored. If further changes are required, touch the desired key. 6-92 CS655 Pro...
Touch [Yes] to complete the setting. The machine power will be turned off, then on. – Touch [No] to cancel the setting. Touch [Cancel] at the lower right side of the screen to restore the Machine Administrator Setting Menu Screen. CS655 Pro 6-93...
Page 227
Touch [04 Touch Screen Adjustment]. The Touch Screen Adjustment Screen will be displayed. Touch the "+" symbol at the upper right corner, then lower left corner on the screen. The present coordinates will be displayed in the message area of the screen. CS655 Pro...
Page 228
If the buzzer tone does not sound, repeat the adjustment procedure or contact your service representative. Press [0] on the control panel keypad to complete the setting. – To cancel the change, press [1] on the control panel keypad. In either case, the Utility Menu Screen will be restored. CS655 Pro...
Once entered, the user name and password are not necessary to be re-entered unless the web browser is restarted. Note To clear the text boxes, click on [Reset]. To cancel adding a new account track data, click on [Back] or any Machine Manager Setting menu item to jump to the desired window. CS655 Pro...
Page 232
Activate the web browser, then select [Open] from the File menu. Enter the URL (http:// [IP address or host name of the machine]), then click on [OK]. The Main Page of the Web Utilities will be displayed. Note The Web Utilities window is subject to change without notice. CS655 Pro...
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Volume Track setting]. The Volume Track Setting menu will be displayed. CS655 Pro...
Page 234
Upper Limit Setting: Color Up to 99999999 Black Up to 99999999 Only effect Individual Management – Management System: Total Management/ Individual Management – Output Permission: Prohibit Color/ Prohibit Black – Useable Function: Prohibit Copy/ Prohibit Scanner/ Prohibit print CS655 Pro...
Page 235
Max. 1,000 account entries can be registered. An error message will be displayed if the above limit is exceeded. An error message may be displayed when the data entry has not been completed due to the machine operation in progress. Please click on [Apply] while the machine is in an idle state. CS655 Pro...
Page 236
Web utilities setting Note To clear the text boxes, click on [Reset]. To cancel adding a new account track data, click on [Back] or any Machine Manager Setting menu item to jump to the desired window. CS655 Pro...
[OK]. The Machine Manager Setting menu will be displayed. Click on [Volume Track setting]. The Volume Track Setting menu will be displayed. Click on [Volume Track data list]. The Volume Track Data List will be displayed. CS655 Pro...
Page 238
Click on the check box(es) to select the account track data of the counter to be cleared. If all the counters are to be cleared, click on [Select All]. – Click on the radio button (a white circle) heading the "Copy/Printer Count reset." or "Scan Count reset." 8-10 CS655 Pro...
Page 239
Click on [Apply] to immediately reset the counters to zero. The message "Setting was changed" will be displayed. – Click on [Back] to return to the Account Track Data List or any menu item to jump to the desired window. CS655 Pro 8-11...
Page 240
Click on [Apply] to immediately delete the data. The message "Setting was deleted" will be displayed. – Click on [Back] to return to the Volume Track Data List or any menu item to jump to the desired window. 8-12 CS655 Pro...
Page 241
Web utilities setting Save Counter. – Click on [Save this table as a file]. – Click on [Save]. CS655 Pro 8-13...
Page 242
Click on [Back] in the browser window to return to the Account Track Data List for starting over. Example: Account track data list stored as a file The "Public User" will be stored by the name of "PUBLIC" in the last line. 8-14 CS655 Pro...
The Enter Network Password dialogue box will be displayed. Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. CS655 Pro 8-15...
Page 244
Make settings for Remote Panel. Specify the IP address of the PC to be used for Remote Panel. Up to 3 addresses can be entered. To complete the entry without making any other setting, proceed to step 8. 8-16 CS655 Pro...
Page 245
Web utilities setting Make settings for Remote Monitor. Enter the user label for the remote monitor, and select the desired refresh interval. – To complete the entry without making any other setting, proceed to step 8. CS655 Pro 8-17...
Page 246
To complete the entry without making any other setting, proceed to step 8. Click on [Registration]. The newly entered data will be registered on the machine immediately. Click on [Administrator Setup Menu] to return to the Machine Manager Setting menu. 8-18 CS655 Pro...
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager menu will be displayed. Click on [Scan transmission setting]. The Scan Transmission Setting window will be displayed. CS655 Pro 8-19...
Page 248
Web utilities setting Register the E-Mail, HDD, FTP, and SMB, as required. Click on [Registration] to complete the entry. The registered content will be displayed. Click on [Back] to return to the Scan Transmission Setting window. 8-20 CS655 Pro...
Page 249
Display the Entry List of the desired item as described in step 7. Click on the entry name to be changed. The window for changing the selected item will be displayed. Change the contents as desired, then click on [Registration]. CS655 Pro 8-21...
Page 250
The window for deleting the selected item will be displayed. Confirm the registered name to be deleted, then click on [Yes]. Click on [Back] to return to the Entry List window. Click on [Back] to return to the Scan Transmission Setting window. 8-22 CS655 Pro...
(Account Track data) paper_setting.txt (Paper Setting data) ip_email.txt (E-mail data of Scan Transmission Setting data) ip_hdd.txt (HDD data of Scan Transmission Setting data) ip_ftp.txt (FTP data of Scan Transmission Setting data) ip_smb.txt (SMB data of Scan Transmission Setting data) CS655 Pro 8-23...
Page 252
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Setting data Import/Export]. The Setting Data Import/Export window will be displayed. 8-24 CS655 Pro...
Page 253
Web utilities setting Export the machine setting file. Select the desired file type from the pull-down menu, then click on [Export….] The File Download dialogue box will be displayed. Click on [Save]. CS655 Pro 8-25...
Page 254
See page 8-27 for details. Import the machine setting file. Click on [Browse…] to designate the machine setting file to be imported, then click on [Import]. The result message will be displayed when the registration is completed. 8-26 CS655 Pro...
Page 255
A line should include NAME, ADDRESS, REFERENCE, and DAILY, separated by a tab. NAME should be 24 bytes or less. ADDRESS should be 250 bytes or less. REFERENCE should be 250 bytes or less. Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column. CS655 Pro 8-27...
Page 256
FILEPATH should be 96 bytes or less. LOGINNAME should be 47 bytes or less. PASSWORD should be 14 bytes or less. REFERENCE should be 24 bytes or less. Mark DAILY USE with "1" or DAILY NOT USE with "0" in each column. 8-28 CS655 Pro...
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Remote Panel Setting/Job History Setting]. The Remote Panel Setting/Job History Setting menu will be displayed. CS655 Pro 8-29...
Page 258
Click on [Registration], then turn off/on the main power switch. When turning the main power switch off then on, be sure to wait 10 seconds or longer before turning it on again; otherwise the machine may not be operate properly. 8-30 CS655 Pro...
Page 259
Enter "admin" in the User Name text box, and an 8-digit administrator password in the password text box, then click on [OK]. The Machine Manager Setting menu will be displayed. Click on [Job History List]. The Job History List menu will be displayed. CS655 Pro 8-31...
Page 260
[Job History List]: Displays last 100 jobs. [Previous]: Scrolls to the previous 100 jobs. [Next]: Scrolls to the next 100 jobs. The items provided in the job history list can be changed. For details, contact your service representative. 8-32 CS655 Pro...
Page 263
The followings describe basic steps to input characters on the character input screen. Touch the corresponding key to input the desired character. Touch [OK]. The character input screen closes. The input characters are displayed on the corresponding column. CS655 Pro...
Page 269
6-63 User Auth./Account Track 6-65 User Authentication Set 6-72 User Counter User Register 6-67 User setting Utility screen outlines Vertical Position Adj. 3-23 Web utilities setting Weekly Timer On/Off Set Weekly Timer Setting Weight 6-81 Without Authentication CS655 Pro 10-5...
Reader's comment sheet Reader's comment sheet Questions Have you found this manual to be accurate? O Yes O No Were you able to operate the product, after reading this manual? O Yes O No Does this manual provide sufficient background information? O Yes O No Is the format of this manual convenient in size, readability and arrangement (page...
Page 272
City: Country: Please return this sheet to: Océ-Technologies B.V. For the attention of ITC User Documentation. P.O. Box 101, 5900 MA Venlo The Netherlands Send your comments by E-mail to: itc-userdoc@oce.com For the addresses of local Océ organisations see: http://www.oce.com...
Page 273
Océ-Australia Ltd. Océ-Österreich GmbH P.O. Box 363 Postfach 95 Ferntree Gully MDC 1233 Vienna Vic 3165 Austria Australia http://www.oce.at/ http://www.oce.com.au/ Océ-Belgium N.V./S.A. Océ-Brasil Comércio e Indústria Ltda. J. Bordetlaan 32 Av. das Nações Unidas, 11.857 1140 Brussel Brooklin Novo Belgium São Paulo-SP 04578-000...
Page 274
Addresses of local Océ organisations Océ-Hungaria Kft. Océ-Ireland Ltd. 1241 Budapest 3006 Lake Drive Pf.: 237 Citywest Business Campus Hungary Saggart http://www.oce.hu/ Co. Dublin Ireland http://www.oce.ie/ Océ-Italia S.p.A. Océ Japan Corporation Strada Padana Superiore 2/B 3-25-1, Nishi Shinbashi 20063 Cernusco sul Naviglio (MI)
Page 275
5450 North Cumberland Avenue Chicago, IL 60656 http://www.oceusa.com/ Note: The web site http://www.oce.com gives the current addresses of the local Océ organisations and distributors. Note: The addresses of local Océ organisations for information about the Wide Format Printing Systems and the Production Printing Systems can be different from the addresses above.