Licensing For V2.X And Inter-Tel Cs-5600 Upgrades; Model 8602 Ip Softphone - Mitel Inter-Tel 5000 Installation And Maintenance Manual

Licensing for v2.x and Inter-Tel CS-5600 Upgrades

The existing Inter-Tel 5000 licensing plan does not change with the product going from v1.2 to
v2.x. However, to use v2.x features, customers must purchase a new software license or an
upgrade license.
The following three scenarios cover hardware and licensing changes associated with upgrading
to an Inter-Tel CS-5600 system running v2.0 or later:
•
•
•
Inter-Tel 5000 v1.2 provides additional licensing flexibility by allowing specific endpoint
licensing.

Model 8602 IP Softphone

One license is required for each Inter-Tel Model 8602 IP softphone. Each concurrent Model
8602 requires a license.
An Enable IP Endpoint license may be required for some configurations that enable digital
capability. For details, contact your authorized Inter-Tel service provider. For licensing part
numbers, see Table 6-6 on
Basic Voice Mail
Each Basic Voice Mail port is licensed, including the first four. With v1.2 and later, four BVM port
licenses are included. Additional 4-port licenses must be purchased in order to use additional
BVM ports.
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008
Software Upgrade: A customer owns or leases an Inter-Tel CS-5200 or CS-5400 system,
which implies the system is running on an Inter-Tel 5000 1.x license. Any customers
upgrading to v2.0 must purchase a v1.x to v2.0 license, part no. 840.0623. In this
scenario, the customer also needs to purchase a new license for the CS-5200/CS-5400
system, part no. 840.6022.
System Upgrade: A customer owns or leases an Inter-Tel CS-5200 or CS-5400 system
and plans on upgrading to an Inter-Tel CS-5600. The customer must purchase the
following items to complete the upgrade:
o 1 – Inter-Tel CS-5600 Processing Server (PS-1) chassis, part no. 580.5600.
o If upgrading from an Inter-Tel CS-5200 system, a Processor Expansion Card (PEC-1),
part no. 580.2020, must be installed on the Processor Module (PM-1), part no.
580.2200, to create an Inter-Tel CS-5400, or Inter-Tel CS-5600 Base Server. For
complete instructions, see "Upgrading System Software to Version 2.x" on
o If upgrading from an Inter-Tel CS-5400 system, a new security key is not necessary—
simply move the existing security key from the Inter-Tel CS-5400 system to the PS-1.
o A v1.x to v2.0 license, part no. 840.0623, for the PS-1 and the same Inter-Tel serial
number as the in-place Inter-Tel CS-5400 system.
o A v2.0 license, part no. 840.6022, for the CS-5600 system type and the same Inter-Tel
serial number as the in-place Inter-Tel CS-5400 system.
New Purchase: A customer purchases a new Inter-Tel CS-5200, CS-5400 or CS-5600.
The customer purchases the v2.0 license, part no. 840.6022. If acquiring an Inter-Tel CS-
5600, the customer must purchase the Base Server and PS-1 hardware, a single USB
security key for the PS-1, and the Inter-Tel CS-5600 CPU license. For applicable part
numbers, see Table 6-4 on
page
Chapter 3: Product Description
Licensing for v2.x and Inter-Tel CS-5600 Upgrades
page 6-4.
6-6.
page 5-146.
Page 3-15