Verifying And Securing Cable Connections; Completing Installation Tasks - Mitel Inter-Tel 5000 Installation And Maintenance Manual

Verifying and Securing Cable Connections

At this point in the installation all cabling to the MDF, patch panel, rack, and endpoints should be
completed, including all cables that terminate at the chassis modules.
To complete cabling:
1.
2.

Completing Installation Tasks

Referring to the following procedures as needed, install optional equipment and/or power up the
system:
•
•
•
•
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008
Plug all applicable cables into their respective modules and chassis ports.
Install the LAN cable from the Processor Module jack to a LAN connection. Plug the
cable into a 100Base-T switch, not a hub.
"Installing a Single Line Handset Amplifier" on
"Installing an External Music Source" on
"Installing External Paging Equipment" on
"Powering Up the System" on
Verifying and Securing Cable Connections
page 5-182
page 5-169
page 5-171
page 5-87
Chapter 5: Installation
Page 5-33