Mitel Inter-Tel 5000 Installation And Maintenance Manual page 229

Hide thumbs Also See for Inter-Tel 5000:
Table of Contents

Advertisement

Model 8690
The Model 8690 multi-protocol endpoint has a touch screen that displays feature, dialpad, and
menu buttons. It supports ITP or SIP mode using 100Base-TX interfaces. The Model 8690 is
configured to use ITP mode by default. For details about ITP and SIP modes, see
Figure 5-54.
HEADSET
Jack*
HANDSET
Jack*
*The headset and handset jacks are located on the base.
The Model 8690 includes the following connections points and options:
®
Inter-Tel
5000 Installation Manual – Issue 2.4, May 2008
Model 8690 Connection Interfaces
Front
(Downlink RJ-45)
LAN/POWER Jack: Connects to an external power supply or a network hub/switch.
PC Ports 1-3: Connect to PCs or any other 100Base-T Ethernet devices. The speeds on
the single uplink and three downlink ports are independent from each other and auto-
negotiable.
Headset/Handset Jack: Connects to a headset or handset.
SPKR Jack: Connects to a speaker and supports mono for IP endpoint and stereo for
Windows CE playback.
MIC Jack: Connects to a microphone equipped with a 3.5mm plug.
Reset Button: Resets the endpoint when pressed and released quickly.
If you press and hold the Reset button until the four LEDs on the front of the
NOTE
endpoint (Message Lamp) start blinking, the system defaults the endpoint
configuration (such as the configuration TFTP URL).
CF Port: Connects to a matchbook-sized compact flash-type memory card that can be
used for copying music, pictures, etc. to the Model 8690. The card also can be used for
additional memory.
PCMCIA Port: Connects to a credit card-sized memory card manufactured to the
standards of the Personal Computer Memory Card International Association.
USB HOST Port: Connects to a standard Universal Serial Bus keyboard, mouse, etc. For
details about how to connect a keyboard and/or mouse, see the applicable Model 8690
Endpoint User Guide (ITP Mode or SIP mode), part no. 550.8116 or 550.8025,
respectively.
USB CLIENT Port: Connects to a host computer that runs Microsoft ActiveSync
PCs 1, 2, and 3
USB
HOST
USB CLIENT
Chapter 5: Installation
Model 8690
page
Back
Reset Button
MIC SPKR
LEDs
PCMCIA
CF
LAN/POWER
(Uplink RJ-45)
®
Page 5-107
5-115.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents