Mitel Inter-Tel 5000 Installation And Maintenance Manual page 354

Chapter 6: Reference
Code-Accessible Endpoint Features
Table 6-19. Endpoint Feature Codes (Continued)
Feature
Station Speed Dial
Station Speed Dial
Programming
Station Speed Dial
View Programming
of Speed Dial buttons
Steal
Switch Keymap
System Forward Enable
System Forward Disable
System Forward On/Off
System Speed Dial
Transfer to Hold
Transfer to Ring
Page 6-32
Code
382 Accesses and dials up to 10 Station Speed Dial numbers that have been
programmed/associated with location codes 0–9 or Speed Dial buttons, as
applicable.
383 Allows the user to program or reprogram up to 10 Station Speed Dial
names and numbers and associate each with location codes 0–9 or with
Speed Dial buttons, as applicable.
396 Allows the user to view on the endpoint display the name and number that
have been programmed/associated with a Speed Dial button.
387 Accessed as an option from the Station Monitor feature (321), the Steal
feature allows the supervisor to take away a call from the hunt group
member/agent.
399 (Not used on single line endpoints.) Allows a user to switch between
standard and alternate keymaps.
352 Enables or disables the database-programmed System Forwarding feature
353 for this endpoint. The on/off feature code can be used to toggle the feature
354 ON or OFF.
381 Dials one of the 1000 System Speed Dial telephone numbers when
followed by a location code 000–999. Also used for reviewing System
Speed Dial numbers. Inter-Tel endpoints use the SYS SPD button.
346 Transfers a call to another endpoint and places it on individual hold so that
it does not ring or send call waiting signals until it recalls.
345 Transfers a call to another endpoint or to an outside telephone number.
Inter-Tel endpoints use the TRANSFER button.
Description
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008