Sip And Itp Default Feature Codes - Mitel Inter-Tel 5000 Installation And Maintenance Manual

SIP and ITP Default Feature Codes

The Show IP feature code displays different information in SIP and ITP modes.
Table 6-20. SIP and ITP Mode Functions for Show IP Feature
Feature Default Code
Show IP 300
(or Display
Time/Date)
Table 6-21
Table 6-21. SIP Default Feature Codes
Feature
Answer (Ringing Call)
Call Forward All Calls
Conference
Do-Not-Disturb
Do-Not-Disturb Cancel
Do-Not-Disturb On/Off
Group Listen
Headset On
Headset Off
Headset On/Off
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008
SIP Mode
Displays the IP Displays the system date and time, extension number, and
address of the status for IP and digital endpoints. The IP address is not
endpoint. displayed in IP mode.
shows default feature codes when operating in SIP mode.
Code
351 Hold – Individual
355 LCD Contrast
5 Message
370 Microphone Mute On/Off
371 Redial
372 Redirect Call
312 Reverse Transfer (Call Pick-Up)
315 Ring Tone Selection
316 Transfer To Ring
317
Chapter 6: Reference
SIP and ITP Default Feature Codes
ITP Mode
Feature Code
336
303
365
314
380
331
4
398
345
Page 6-33