Endpoints; Model 86008620/8622/8662 Dimensions; Table; Ip Devices - Mitel Inter-Tel 5000 Installation And Maintenance Manual

Chapter 4: Specifications

Endpoints

Endpoints
A variety of IP endpoints can be used on the Inter-Tel 5000 platform. The combination of
endpoints depends on the number and type of endpoint modules installed. For endpoint
illustrations and endpoint feature description, refer to the Inter-Tel 5000 Features and
Programming Guide (part no. 580.8006).
At least one display endpoint should be installed to allow an administrator the capability of
seeing system alarm messages, program system data, and receive unsupervised CO recalls.
When the system is in the default configuration, extension number 1000 is preassigned as an
administrator and as the primary attendant.
For reference, the following tables show approximate endpoint dimensions.

Table 4-19.

Model 86008620/8622/8662 Dimensions

Measurement (Metric)
Dimension
2.5 in. (6.4 cm)
Height
6.4 in. (16.3 cm)
Width
8.3 in. (21.1 cm)
Length
2.1 lb (0.9 kg)
Weight

IP Devices

The Inter-Tel Protocol (ITP) IP PhonePlus, multi-protocol endpoints, and IP Single Line
Adapters (SLA) provide the functionality that allows the user to make calls through the IP
network to the converged communications platform.
The Model 8690 is a multi-protocol display endpoint that uses Windows CE as the interface.
The IP devices operate the same as their counterparts installed directly on the system, except
that IP devices:
•
•
•
•
The IP SLA operates like a standard single line endpoint.
Page 4-40
8600
Cannot use a MDPM.
Cannot support a full DSS/BLF.
Do not support Desktop OAI applications.
Do not need to support the Enhanced Speakerphone Mode feature.
8620/8622/8662
Measurement (Metric)
Dimension
2.5 in. (6.4 cm)
Height
8.8 in. (22.3 cm)
Width
8.3 in. (21.1 cm)
Length
2.7 lb (1.2 kg)
Weight
®
Inter-Tel 5000 Installation Manual – Issue 2.4, May 2008