Mitel Inter-Tel 5000 Installation And Maintenance Manual page 422

Hide thumbs Also See for Inter-Tel 5000:
Table of Contents

Advertisement

Appendix B: Network IP Topology
Private Network With Near-end NAT Traversal
The following command associates the public address with the Inter-Tel CS-5200/5400/5600
private address. This creates the "NATed" address. The ISP must be known to send packets for
this public IP to the Inter-Tel CS-5200/5400/5600.
ip nat inside source static 192.168.1.2 208.13.17.2
!
The following commands set up the dynamic NAT configuration to use a pool of public
addresses. This is not specific to this example, but it is included here to contrast static vs.
dynamic NAT.
ip nat translation timeout 86400
ip nat translation tcp-timeout 86400
ip nat translation udp-timeout 300
ip nat translation dns-timeout 60
ip nat translation finrst-timeout 60
ip nat pool NatPool0 208.13.17.40 208.13.17.62 netmask
255.255.255.0
ip nat inside source list 1 pool NatPool0 overload
!
Page B-24
®
Inter-Tel
5000 Installation Manual – Issue 2.4, May 2008

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents