Twister/Twister Junior
11.4.1 Disassembly of actuator motor
•
Remove connector plug (10) and remove cable binders if present.
•
Loosen bolt (2) and nut (5) with 13 mm spanner, and remove together with washers (3) and
bush (4) from the headrest attachment (8) on the backrest tubes (9).
•
Loosen quick-release bolts (6) and remove actuator motor (1).
11.4.2 Reassembly of actuator motor
•
Reassembly takes place in the reverse order.
Caution:
The nut (5) must always be replaced.
Service Manual
Page 90
Issued:21.01.02