Disassembly Of The Direction Indicators; Reassembly Of The Direction Indicators; Disassembly Of The Bulb Holder; Reassembly Of The Bulb Holder - Invacare Twister Service Manual

Twister/Twister Junior

15.6.3 Disassembly of the direction indicators

•
Loosen tapping screw (8) completely and detach the direction indicator glass (16).
•
Press light bulb (18) down slightly, turn 1/8 rotation to the left and pull from its socket (11).
•
Loosen screw (9) and remove.
•
Turn the direction indicator housing (17) slightly left/right and carefully pull from the bulb
holder (1) up to the point where the connection cable (4) becomes accessible.
•
Pull mirror with bulb socket (11) carefully from the direction indicator housing up to the
point, where the connections at the bulb socket become accessible.
•
Mark connections, unsolder from the bulb socket and detach mirror with socket (11).
•
Pull connection cable (4) from the direction indicator housing (17) and detach housing.

15.6.4 Reassembly of the direction indicators

•
Reassembly takes place in the reverse order.

15.6.5 Disassembly of the bulb holder

•
Dismount headlight (3) completely.
•
Dismount direction indicator (2) completely.
•
Remove cable binder (10).
•
Loosen screw with washer (5) completely and detach together with bulb holder.
•
If necessary, remove washer and rubber grommet (6) from the chassis (12).

15.6.6 Reassembly of the bulb holder

•
Reassembly takes place in the reverse order.
Note:
Don't forget cable binders!
Service Manual
Page 150 Issued:21.01.02