Twister/Twister Junior
19.1.5 Disassembly of the joystick box holder (hinged)
•
Detach joystick box (3) as described above.
•
Loosen regulating screw (23) at armrest (1 or 2) and detach joystick box holder.
•
Loosen four nuts (22). Remove the screws (21) and remove the four levers (18, 19 and 20)
from the bearing blocks (17).
•
Loosen two Phillips screws (24) and remove guide pieces (15 and 16) from the bearing
brackets.
•
If necessary, remove slider (11) by means of a screwdriver out of the guide pieces (15 and
16).
19.1.6 Reassembly of the joystick box holder (hinged)
•
Reassembly takes place in the reverse order.
Note:
During the assembly make sure, that the lever with pressure piece (20) is fixed in
position in such a way that the guide piece (16) can lock into place when swivelling.
19.1.7 Disassembly of the joystick box holder for attendant
•
Detach joystick box (3) as described above.
•
Dismounting RECARO seat: Loosen screw at push handle and detach holder (27).
•
Dismounting other seat: Loosen nuts (30) and holder (26) completely together with
clamping pieces (28) and screws (29) from the backrest.
•
If necessary, remove slider (11) by means of a screwdriver out of the guide pieces (15 and
16).
19.1.8 Reassembly of the joystick box holder for attendant
•
Reassembly takes place in the reverse order.
Service Manual
Page 174
Issued:21.01.02