Invacare Twister Service Manual page 9

Twister / Twister Junior
16.4 Testing motor, magnetic brake and freewheel switch
16.4.1 Testing preparations / replacement of drive motors
16.4.2 Testing drive motor
16.4.3 Checking the magnetic brake
16.4.4 Checking the freewheel switch
17 TESTING AND REPAIR WORK ON THE ACTUATOR MOTORS
17.1 General
17.2 Checking the actuator motors
17.2.1 Visual inspection of the plug contacts:
17.2.2 Continuity check:
17.2.3 Performance test:
17.3 Replacing the actuator motors for the legrests
17.3.1 Disassembly
17.3.2 Reassembly
17.4 Replacing the seat adjustment actuator motor (without lifter module)
17.4.1 Disassembly
17.4.2 Reassembly
17.5 Replacement of seat adjustment (with lifter module)
17.5.1 Disassembly (Twister)
17.5.2 Reassembly (Twister)
17.5.3 Disassembly (Twister Junior)
17.5.4 Reassembly (Twister Junior)
17.6 Replacing actuator of automatic seat back adjustment or support tube for
manual seat back adjustment.
17.6.1 Disassembly
17.6.2 161
18 TESTING THE DRIVING ELECTRONICS
18.1 Overview of the electronic module and cable
18.2 Testing joystick boxes
18.2.1 Check power supply to joystick box
18.3 - Check power module.
18.3.1 Status display
18.3.2 Check power supply to power module.
Remove the battery cable plug from the power module.
18.4 Checking lighting modules or combined lighting / actuator module
18.4.1 Status display
18.4.2 Preparations for testing
18.4.3 Check the power supply from the power module to the lighting module 24V
or to the lighting / actuator module
18.5 Testing additional power supply of lighting module 24V
18.5.1 Preparations for testing
18.5.2 Test
18.6 Check the voltage converter for the Recaro seat
18.6.1 Preparations for testing
18.6.2 Checking voltage at Recaro seat voltage converter
Issued: 21.01.02
Service Manual
Page 9
154
154
154
155
155
156
156
156
156
156
157
158
158
158
159
159
159
160
160
160
160
160
161
161
162
162
164
164
166
166
167
167
168
168
168
12V,
169
12V (TÜV version) 170
170
170
171
171
171