Disassembly Of Legrests; Reassembly Of Legrests - Invacare Twister Service Manual

Twister/Twister Junior
Note:
For maintenance and repair works on the chassis or on the seating system itself, the
entire Recaro seat can be separated from the chassis:
•
Detach joystick box from the side panels.
•
If necessary, loosen the actuator motor electrical connections (Legrest adjustment).
•
Remove legrests.
•
Free the connection cables from their clamping pieces (under the seat).
•
Remove the seat tilt adjustment quick-release bolts (24) (not illustrated) or the
actuator motor (22).
•
Support the Recaro seat , remove the spring-loaded catches (11) and lift the Recaro
seat completely off the chassis.

10.4.1 Disassembly of legrests

•
If necessary, loosen the actuator motor electrical connections (Legrest adjustment).
•
Release legrest lock and detach legrests.
•
Use a suitable sleeve, such as a leather strip, and hold the locking device bolt with pliers.
•
Loosen nut (M5) completely and detach together with bolt, spring and locking lever, from
the seat frame.
•
Remove plastic washers from the hinge bolts (19 and 20 resp.).
•
Use a suitable sleeve, such as a leather strip, and detach the hinge bolts(19, or 20)
together with limit stop plate (21), from the seat frame (10).

10.4.2 Reassembly of legrests

•
Reassembly takes place in the reverse order.
Service Manual
Page 82 Issued:21.01.02