Twister / Twister Junior
21.2 Programming on the PC
•
Connect the PC using the programming cable to the
programming socket of the joystick box.
•
Switch the PC on and start the programme (Dynamic
Wizard).
•
Switch the wheelchair on via the joystick box.
•
See the required programme version from the
programme version table.
•
For programming the wheelchair follow the description
of the programme (Software Manual).
•
Remove the connection cable.
•
Switch the wheelchair off and on again
•
Test all driving functions.
Note:
• The version of the programme depends on the type of wheelchair.
• The program variation tables can be found in the program description (software
handbook) or in the programming device description.
• The number of the software version can be found on a sticker on the joystick box.
• By means of the programme software, also driving profiles that are individually tailored
to the user can be programmed.
Issued: 21.01.02
Service Manual
Programming socket
Standard joystick box
Programmin
g socket
Software version number
Twister Junior joystick box
Programmin
g socket
Software version number
Page 193
and version number