Twister/Twister Junior
9.4.1
Disassembly of legrests
• Unlock legrests and detach upper part of legrest (1) from the wheelchair
• Remove drilling screws (40) and pull off footplate (5) from footplate tube(4).
• Remove hex bolt (36) and detach footplate tube (4).
• Remove hex bolt (12) and detach footplate tube (15).
• Loosen clamp (16) and detach insertion tube from legrest (3).
• Loosen machine screw (30) and detach calf support.
• Loosen cheese head screw and remove calf support holder (7) from legrest calf support
joint.
• Loosen release lever (9) and pull off from legrest rocker (2).
• Back-locking (11 - 15)
• If necessary, detach sliders (7.9) carefully from the tube using a sharp object such as a
knife.
9.4.2
Reassembly of legrests
• Reassembly takes place in the reverse order.
After reassembly, footplate tilt must be readjusted using the hex bolt (10). Secure using
hex nut (11)!
Observe part orientation while reassembling (left-hand /
right-hand side).
Adjust legrests to identical length .
Adjust both footplates to the same tilt.
Service Manual
Page 54
Issued:21.01.02